INTRODUCTION
Thank you for opting for Könner & Söhnen
®
products. This manual contains a brief description of safety,
setup and use. More information can be found on the official importer’s website in the support section:
konner-sohnen.com/manuals
You can also go to the support section and download the manual by scanning the QR code or on thewebsite
of the official importer of Könner & Söhnen
®
at www.konner-sohnen.com
Failure to follow the recommendations marked with this
sign may lead to serious injury or death of the operator
or third parties.
ATTENTION – DANGER!
Useful information while operating the machine.
IMPORTANT!
Please, read this manual carefully before use!Please, read this manual carefully before use!
The manufacturer of Könner & Söhnen
®
products reserves the right to make changes that may not be
reected in this manual, namely:
- The manufacturer reserves the right to make changes in the product design, conguration and construction.
- The images and drawings in this manual are for reference only and may dier from the actual components
and inscriptions on the products.
Contact information that you are free to use in case of any problems can be found at the end of this
manual. All information in this manual is correct to the best of our knowledge and belief at the date
of its publication. The current list of service centers can be found on the ocial importer’s website at
www.konner-sohnen.com
SAFETY INSTRUCTION
1
WORK AREAWORK AREA
• Keep the work area clean and well lit. Cluttered and dark areas invite accidents
• Do not operate power tools in explosive atmospheres, such as in the presence of ammable liquids,
gases or dust. Power tools create sparks, which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETYELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodied plugs and matching outlets will reduce risk of electric
shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
Read all instructions failure to follow all instructions list-
ed below may result in electric shock, re and /or serious
injury. The term “power tool” in all of the warnings list-
ed below refers to your mains operated (corded) power
tools.
WARNING!
konner-sohnen.com | 1
