1
ENGLISH
When using electrical appliances, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and/or injury to persons
including the following:
Read all instructions.
Do not touch hot surfaces. Use handles or knobs.
To protect against re, electric shock and injury to persons, do not immerse
cord, plugs or machine in water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning the appliance.
Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or has been damaged in any manner. Return appliance to the
nearest authorized service facility for examination, repair or adjustment.
The use of accessory attachments not recommended by the appliance
manufacturer may result in re, electric shock or injury to persons.
Your appliance is designed for domestic use only.
Do not use outdoors.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Always attach plug to appliance rst, then plug cord into the wall outlet. To
disconnect, turn any control to the “off” position, then remove plug from wall
outlet.
Do not use appliance for other than intended use.
Only use the kettle to heat water. Never heat other liquids in the kettle.
SAVE THESE INSTRUCTIONS
Your kettle should only be used with its lid locked and its base.
Never touch the lid when the water is boiling.
Never open the lid when the water is boiling.
Scalding may occur if the lid is removed.
CAUTION
This machine is intended for household use only. Any servicing other than
cleaning and user maintenance should be performed by the nearest authorized
KRUPS Service Center. Visit our website at www.krupsusa.com in the USA
or www.krups.ca in Canada or contact your respective country’s Consumer
Service department for the service center nearest to you. To reduce the risk of
re or electric shock, do not attempt to disassemble the machine.
Repair should be done at an authorized KRUPS Service Center only.
