Kuzco Floyd 501102BG-LED Manual

Kuzco Lys Floyd 501102BG-LED

Læs gratis den danske manual til Kuzco Floyd 501102BG-LED (1 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Kuzco Floyd 501102BG-LED, eller vil du spørge andre brugere om produktet?

Side 1/1
Remove the fixture from its original packaging and remove
the fixture mounting plate from within the canopy (1c) (2a)
by unthreading nuts . Attach the fixture mounting plate (2c)
(1c) (1a) to the electrical junction box on the ceiling using
the two screws provided in the hardware package.(1e)
Attach the fixture to the mounting plate. First attach all
wiring with the provided marrets (white to white N, (1b)
black to black L, ground to ground G). Push the
mounting plate screws through the holes in the back of (1d)
Next, screw on the decorative nuts until the fixture is (2c)
secured to the ceiling.
Install the glass cover onto the fixture. Gently placing the
glass cover inside of the lower metal inside clips . (2d) (2a)
Once the glass has been placed inside of the bracket,
gently guide the ring bracket over the canopy top clip (2e)
(2). (2e) Make sure that you align the clips with the three
convexes underside catch.(2)
You have now completed the installation of your fixture,
please enjoy.
INSTALLATION SHEET
501102
Round LED Flush Mount
START FROM HERE
Please Note:
All Kuzco LED fixtures come with pre-wired LED module(s).
Unless instructed to do so, please do not touch any part of the LED module(s) as any
unnecessary contact with the module could cause permanent damage.
For dimming, an ELV (Electronic Low Voltage) type of dimmer is required.
Make sure power is completely off at the fuse box.
Have your fixture installed by a qualified licensed electrician
Prepare everything in a clear area.
Wear gloves at all times during this installation.
Read instructions carefully before you start assembly.
Keep this instruction sheet for future reference.
Technical Support: 1-855-855-8926
1.
2.
3.
4.
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
20181127
press here
1a.
1b.
1e.
2b.
2.
2e.
1c.
1d.
2d.
2c.
2a.
IMPORTANT, match the lower
catches with the upper spring loaded
knobs, this will properly secure the
metal frame to the canopy.


Produkt Specifikationer

Mærke: Kuzco
Kategori: Lys
Model: Floyd 501102BG-LED

Har du brug for hjælp?

Hvis du har brug for hjælp til Kuzco Floyd 501102BG-LED stil et spørgsmål nedenfor, og andre brugere vil svare dig