La Crosse Technology 404-1210S Manual


Læs gratis den danske manual til La Crosse Technology 404-1210S (4 sider) i kategorien Vækkeur. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 28 anmeldelser. Har du et spørgsmål om La Crosse Technology 404-1210S, eller vil du spørge andre brugere om produktet?

Side 1/4
404-1210S www.lacrossetechnology.com/support Page | 1
Model: 04 1210S4 -
Instruction Manual
DC: 070716
10” Atomic Wall Clock
Get Started
1: Slide the switch to select a time zone.
2: Insert 1 fresh AA, Alkaline battery according to the polarity
marked on the case.
3: For the best reception, please place clock on a wall that faces
Ft. Collins, Colorado. During the night, your clock will
automatically set itself.
When the battery is installed, the hands will move to the 12:00
position and search for the radio signal.
If the radio signal is not received in the first 10 minutes, the
clock will start running from the 12:00 position and will
continue to run.
The clock is searching for the WWVB signal and once the
radio signal is decoded, the hands will automatically adjust to
the correct time. This may take up to 5 nights if there is
atmospheric interference.
R :eset If the clock does not respond to the various function
modes, press the RESET button on the movement case.
404-1210S www.lacrossetechnology.com/support Page | 2
Position Clock
For the best reception, please place clock on a wall that faces
Ft. Collins, Colorado. antenna is best positioned for signal The
reception when there is only one wall or window between the
clock and outside.
Choose a location 6 feet or more from electronics such as
cordless phones, wireless gaming systems, televisions,
microwaves, routers, baby monitors, etc., which can prevent
signal reception.
Large office buildings, schools, or hospitals may not receive
the WWVB time signal in every room.
s Building with a metal roof may interfere with reception.
Note: We recommend that you change the battery every 24
months to maintain accuracy. Remove the battery when the clock
will not be in use for an extended period.
Manual Set Time
On rare occasions, the clock may
not be able to utilize the radio
controlled function because of the
strength of the signal or the
geographic location. In this case,
the clock can be set manually and
used as a regular quartz wall clock.
Set the clock manually:
1. Hold the SET button for 3+ seconds to activate the manual
mode. There are two ways to move the minute hand forward.
Hold the SET button down to move the minute hand
forward consistently.
Alternatively, press the SET button rapidly (more than once
per second) to move the minute hand forward step by step
(in minute increments).
Use these features to move the minute hand forward until
the correct time is set. The clock will automatically leave
manual mode after the SET button is not pressed for 6+
seconds.


Produkt Specifikationer

Mærke: La Crosse Technology
Kategori: Vækkeur
Model: 404-1210S

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology 404-1210S stil et spørgsmål nedenfor, og andre brugere vil svare dig