La Crosse Technology WS-8016U Manual

La Crosse Technology Vækkeur WS-8016U

Læs gratis den danske manual til La Crosse Technology WS-8016U (3 sider) i kategorien Vækkeur. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14 anmeldelser. Har du et spørgsmål om La Crosse Technology WS-8016U, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

In the event of changing batteries of the unit ensure that the batteries do not spring free from the

contacts. Always wait at least 5 minutes after removing the batteries before reinserting, otherwise

start up and transmission problems may occur.

LCD1 display

LCD2 display

Indoor temperature

or seconds display

Weekday or

seconds display

Holder

Hanging holes

Foldable stand

Battery cover

WS-8016U

ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE

Instruction Manual

FUNCTION KEYS

The Atomic Clock has four easy to use keys:

INTRODUCTION: SET key : To enter into the set mode for the following functions: time zone, DST

ON/OFF (daylight saving time), language, hour, minute, year, month, day,

weekday, 12/24 hour, ºC or ºF temperature display

Congratulations on purchasing this state-of-the-art Atomic Clock as an example of superior

design and engineering. Providing WWVB radio-controlled time, date, time zone, indoor and

outdoor temperature display, this innovative clock is ideal for home or office use. Operation of

this product is simple and straightforward. By reading this operating manual, the user will

however receive a better understanding of the Atomic Clock together with the optimum benefit of

all its features.

+ key : To toggle between the second, temperature or weekday display

To change any values in manual set mode

ALM key : To enter into the alarm set mode

To set the alarm ON/OFF

SNZ key : To activate the snooze function during alarm

FEATURES: To display the alarm time in normal mode display

ATOMIC CLOCK: To exit the setting modes

ATOMIC CLOCK LCD SCREEN DESCRIPTIONS

The Atomic Clock's LCD is divided into 2 sections and once the batteries are inserted, all the

segments will light up briefly before displaying the information for time, date, indoor and outdoor

temperatures.

• WWVB Radio controlled time with manual time setting

• 12/24 hour time display

• Time display: hour, minute, second

• Alarm setting with snooze function

• Calendar display

• Weekday display (3 languages to choose from: English, French

and Spanish)

• Time zone setting

• Daylight savings time ON/OFF option (DST)

• ºC or ºF temperature display selectable

• Indoor temperature display

• Outdoor temperature display via 433MHz transmission

• Wall mount or freestanding

OUTDOOR TEMPERATURE TRANSMITTER:

• Remote transmission of outdoor temperature to Temperature Station by 433 MHz signals

Function keys

•

MANUAL SETTINGS

Note:

If the Atomic Clock has already successfully received the WWVB time signal and displays

the correct time and date, then the Manual settings can be omitted.

After completion of the above described procedures in “Setting up” the manual setting modes

can be entered by pressing and holding the SET key for 3 seconds. The following settings can

now be programmed:

• Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK

The Atomic Clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow

the steps below:

1. Insert finger or other solid object in the space at the bottom center of the battery compartment

and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

DO NOT SET THE CLOCK.

TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

TRANSMITTER

The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the

steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery cover on the unit.

Alkaline batteries are recommended for use in both units

SETTING UP: Do not set the clock until the outdoor temperature is displayed.

1. Place batteries in the outdoor transmitter first, then into the atomic clock. DO

NOT PRESS ANY BUTTONS FOR 10 MINUTES.

2. After the 10 minutes both the Indoor and Outdoor areas on your clock should have a

temperature showing. If not, remove both sets of batteries, wait 5 minutes and repeat

step one.

3. After the clock receives the outdoor temperature, set your time zone using the

manual settings below. The default time zone is Eastern Standard Time.

4. After the clock receives the outdoor temperature the WWVB time code reception will

automatically start. This reception typically takes between 5-10 minutes in good

conditions. If after 10 minutes the WWVB time has not been received, use the SET key to

manually enter the set mode and change either the time or date in order to activate the

WWVB reception (see manual settings below). The clock will then automatically attempt to

receive the WWVB time from 12:00 am through 6:00 am each day (attempts WWVB

reception every full hour within this time frame). When this is successful, the received time

will override the manually set time. The date is also updated with the received time

(Please refer to notes on “Radio controlled time” and “Manual time setting”).

Note:

Time zone setting

DST ON/OFF

Language display setting

Manual time setting

Year setting

Month setting

Date setting

Weekday setting

12/24 hour time display setting

ºC or ºF setting

TIME ZONE SETTING

After entering the manual setting mode as described above, the time zone can be set between

the –1 to –12 hour or Greenwich Mean Time (GMT) range in LCD2. To do this:

1. The time zone (LCD2) will start flashing (Default setting "-5h“). Select the desired time zone

by pressing and releasing the + key.

Note: The time zones from –4 to –10 hours will be displayed with 3 characters abbreviations:

Outdoor

temperature

display

larm icon

Radio reception icon

• -4 ATL (Atlantic time),

• -5 EST (Eastern time; default time zone),

• -6 CST (Central time),

• -7 MST (Mountain time),

• -8 PST (Pacific time),

• -9 ALA (Alaska time),

• -10 HAW (Hawaii time).

• "GMT” will be displayed if set to GMT (0).

2. Press and release the SET key to enter the “DST Setting“.

DST SETTING (daylight saving time)

1. The ON digit will start flashing on LCD1. Set the DST ON or OFF by pressing the + key.

2. Press and release the SET key to enter the “Language Setting“.

Note:

The DST default is “ON”, meaning that the WWVB will automatically change the time according

to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes

(Arizona and parts of Indiana) turn the DST “OFF”.

LANGUAGE SETTING

The weekdays can be displayed in LCD1 with the pre-set languages: US English, French and

Spanish.

1. Set the desired language for the weekday display in LCD 2 by use of the + key.

2. Press and release the SET key to enter the mode “Manual Time Setting”.

MANUAL TIME SETTING

In case the Atomic Clock is not able to detect the WWVB-signal (disturbances, transmitting

distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.

Note:

In 12 hours mode the time will be displayed with an additional “PM” for the time from 12:00 noon

until 11:59.

1. The hour digits will start flashing on LCD1. Set the desired hours by pressing and releasing

the + key followed by pressing the SET key.

2. Now the minute digits will start flashing. Set the desired minutes by pressing and releasing the

+ + key . If the key is held, the units will increase by 5.

3. Press and release the SET key to move to the “Year Setting”.

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Vækkeur
Model:	WS-8016U

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology WS-8016U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vækkeur La Crosse Technology Manualer

La Crosse Technology 404-3828L Manual

9 Oktober 2025

La Crosse Technology 404-3027C Manual

9 Oktober 2025

La Crosse Technology 404-3450B Manual

7 Oktober 2025

La Crosse Technology 404-3730 Manual

7 Oktober 2025

La Crosse Technology 404-3828K Manual

7 Oktober 2025

La Crosse Technology 513-1412 Manual

7 Oktober 2025

La Crosse Technology 404-3027B Manual

7 Oktober 2025

La Crosse Technology 513-02927 Manual

22 August 2025

La Crosse Technology 302-1408 Manual

21 August 2025

La Crosse Technology 404-3015B Manual

13 August 2025

Vækkeur Manualer

Nyeste Vækkeur Manualer

Vevor 9988 Manual

30 November 2025

Valcom VIP-426A-D Manual

26 November 2025

Valcom VIP-4171-A12-IC Manual

26 November 2025

Valcom VIP-4171-D44-IC Manual

25 November 2025

Vevor 2011 Manual

21 November 2025

Vevor Grandfather Clock 9317 Manual

20 November 2025

Vevor 9259 Manual

20 November 2025

Kienzle 14982 Manual

17 November 2025

Kienzle 14983 Manual

13 November 2025

Techno Line WT 7006 Manual

13 November 2025