La Crosse Technology WS-8119U-IT-B Manual

La Crosse Technology Vækkeur WS-8119U-IT-B

Læs gratis den danske manual til La Crosse Technology WS-8119U-IT-B (3 sider) i kategorien Vækkeur. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om La Crosse Technology WS-8119U-IT-B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Page 1 of 6

Model WS-8119U

Atomic Digital Wall Clock

With Time with Seconds, Month, Date, Day, & IN/OUT

Temperature

QUICK SETUP GUIDE

Table of Contents

Table of Contents ............................................................................................ 1

Congratulations ............................................................................................... 2

Features: ......................................................................................................... 2

Setup Information: ........................................................................................... 2

The Outdoor Temperature Sensor .................................................................. 2

Positioning the Temperature Sensor: ............................................... 3

To wall mount the Temperature Sensor: ........................................... 3

WWVB (Atomic Time) Radio signal: ............................................................... 3

Setup of Time and Display Options: ................................................................ 3

1. Set the Time Zone: ....................................................................... 4

2. Set Daylight Saving Time ON/OFF: .............................................. 4

3. Set Language: .............................................................................. 4

5. Set Time Manually - Minute: ......................................................... 4

6. Set Date Manually - Year: ............................................................. 4

7. Set Date Manually - Month: .......................................................... 4

8. Set Date Manually - Date: ............................................................. 4

9. Set Date Manually - Day of Week: ................................................ 4

10. Set 12 or 24 Hour Time Mode:.................................................... 4

11. Set Temperature Mode - °F or °C: .............................................. 4

Daylight Saving Time ...................................................................................... 4

Setting the Daily Alarms: ................................................................................. 4

About the Daily Alarms: ........................................................................... 5

Automatic Snooze function: ............................................................................ 5

Online Resources ............................................ Error! Bookmark not defined.

Care and Maintenance ..................................... Error! Bookmark not defined.

Battery Replacement ...................................................................................... 5

The Low Battery Icons: ..................................................................... 5

Specifications .................................................................................................. 5

Power Requirements ...................................................................................... 6

FCC Statement ............................................................................................... 6

Warranty Information ...................................................................................... 6 

Page 2 of 6

Congratulations

You have purchased an atomic digital Atomic Clock from La Crosse

Technology®, providing the world's most accurate time at a glance, plus

wireless outdoor temperature.

Features:

x WWVB Radio Controlled Clock (Atomic Clock)

x Time in 12/24 hour format

x Manual time setting option

x Time Zone setting: +/- 12 Hours from GMT

x Daylight Saving Time(DST) On/Off

x Continuous calendar up to year 2054

x Date and weekday displayed and set automatically with the time

x Temperature display in °F or °C

x Snooze function (10 minutes)

x Indoor thermometer

x Wireless Outdoor Temperature Sensor

x Low battery icons for display and sensor

Setup Information:

The Temperature Sensor uses 2 x AAA, IEC LR3 1.5V battery. To install and

replace the batteries, please follow the steps that follow:

x Position the Atomic Clock and the Outdoor Sensor

five to six feet apart with nothing between them.

x Insert batteries into the Wireless Outdoor

Temperature Sensor first - it is important that you do

not insert the batteries into the Atomic Clock yet.

x You must insert the batteries into the Atomic Clock

within 3 minutes of inserting the batteries into the

Sensor.

x Slide out the battery compartment lid at the bottom of

the Outdoor Sensor.

x Insert the batteries into the Outdoor Sensor first, observing the

correct polarity (see markings inside battery compartment). Replace

the battery holder on the unit.

x Immediately after and within 3 minutes, insert the batteries into the

Atomic Clock, observing the correct polarity (see markings inside

battery compartment). Replace the battery cover. The Atomic Clock

uses 2 x AA batteries ( IEC LR6, 1.5V ).

x The outdoor temperature and the signal reception icon should be

displayed on the Atomic Clock. If this does not happen after 3

minutes, the batteries will need to be removed from both units and re-

inserted, following the instructions above.

Note: In the event of changing batteries in any of the units, all units need to

be reset by following the setting up procedures. This is because a random

security code is assigned by the Sensor at start-up and this code must be

received and stored by the Atomic Clock in the first 3 minutes of power being

supplied to it

Note: If the signal reception is not successful on the first frequency

(915MHz) for 22 seconds, the frequency is changed to 920MHz and the

learning is tried another 22 seconds. If still not successful the reception is

tried for 22 seconds on 910MHz. This will also be done for re-

synchronization.

The Outdoor Temperature Sensor

x Remote transmission of outdoor temperature to Temperature Station

by 915 MHz

x Shower proof casing

This product offers: INSTANT TRANSMISSION is the state-of-

the-art new wireless transmission

technology, exclusively designed and

developed by LA CROSSE TECHNOLOGY.

INSTANT TRANSMISSION offers you an

immediate update (every 8 seconds!) of all

your outdoor data measured from the

transmitters: follow your climatic variations

in real-time!

Page 3 of 6

x Wall mounting case

x Mount in a sheltered place. Avoid direct rain

and sunshine.

x Under the eaves of your home is an ideal

place.

Positioning the Temperature Sensor:

The Sensor is supplied with a holder that may be attached to a wall with the

two screws supplied. The Sensor can also be positioned on a flat surface by

securing the stand to the bottom to the Transmitter.

Note: Before permanently fixing the Sensor wall base, place all units in the

desired locations to check that the outdoor temperature reading is

receivable. If the signal is being received, the signal reception icon will be

displayed on the Atomic Clock. In event that the signal is not received,

relocate the Sensor or move it slightly as this may help the signal reception.

To ensure a good connection, there should be a distance of no more than

200 feet between the final position of the Atomic Clock and the Sensor.

To wall mount the Temperature Sensor:

1. Secure the bracket onto a desired wall using the screws

and plastic anchors.

2. Clip the remote temperature sensor onto the bracket.

WWVB (Atomic Time) Radio signal:

x The clock must receive the WWVB Radio Signal to automatically set

the time, date and weekday.

x The clock automatically starts the WWVB on the top of the hour

between the hours of 12:00 AM and 6:00 AM.

x If this synchronization attempt is successful the radio tower icon

appears on the display. The radio tower icon will disappear if the

signal reception is unsuccessful.

About WWVB (Atomic Time) Radio Signal Reception:

x A continuously displayed radio tower icon indicates that the

WWVB signal was received successfully during the last attempt. If

the clock attempts to receive the WWVB signal and is unsuccessful,

the tower icon will not be continuously displayed on the LCD.

x We recommend a minimum distance of 8 feet (2.5 meters) to all

sources of interference, such as televisions or computer monitors

x Radio reception is weaker in rooms with concrete walls (e.g.: in

cellars) and in offices. In such environments, place the system close

to the window.

Setup of Time and Display Options:

Above: Back view of Atomic Clock showing buttons and battery

compartment.

Note: The "SET" button is used to enter SET mode. The display will exit

SET mode automatically after 10 seconds of inactivity. If the display exits

SET mode while you are following the setup instructions, press the "SET"

button the indicated number of times to return to the portion of the SET mode

desired.

Page 4 of 6

1. Set the Time Zone:

Press the “SET” button and the Time Zone display will flash. Use the

“PLUS” button to select the correct Time Zone setting from the

available selections below:

 -1,-2,-3: Other time zones

 -4: ATL - Atlantic

 -5: EST - Eastern (default setting)

 -6: CST - Central

 -7: MST - Mountain

 -8: PST - Pacific

 -9: ALA - Alaska

 -10,-11,-12,12,11,10,9,8,7,6,5,4,3,2,1: Other time zones

 0: - Greenwich Mean Time (GMT)

2. Set Daylight Saving Time ON/OFF:

Press the “SET” button a second time and DST will flash. Press the

"PLUS" button to toggle Daylight Saving Time on ("On") or off ("OFF").

See "Daylight Saving Time" on page 4 for more information.

3. Set Language:

Press the “SET” button a third time and the Language Abbreviation

will flash. Press the "PLUS" button to switch the Language to be

displayed. The three-letter abbreviation for the day of the week will

display in the bottom of the LCD while the setting flashes above.

US: English (default setting)

F: French (Français)

E: Spanish (Español)

d: German (Deutsch)

Note: Manual time and date settings are optional. In most cases, the time

and date will set automatically via WWVB radio signal. If placement for the

display does not allow for WWVB reception due to interference, you will need

to set the time and date manually.

4. Set Time Manually - Hour:

Press the “SET” button a fourth time and the Hours digits will flash. Use

the “PLUS“ button to set the correct hour.

5. Set Time Manually - Minute:

Press the “SET” button a fifth time and the Minutes digits will flash. Use

the “PLUS“ button to set the correct minute.

6. Set Date Manually - Year:

Press the “SET” button a sixth time and the Year digits will flash. Use

the “

PLUS“ button to set the correct year.

7. Set Date Manually - Month:

Press the “SET” button a seventh time and the Month digits will flash.

Use the “PLUS“ button to set the correct month.

8. Set Date Manually - Date:

Press the “SET” button an eighth time and the Date digits will flash. Use

the “PLUS“ button to set the correct date.

9. Set Date Manually - Day of Week:

Press the “SET” button a ninth time and the Day of Week abbreviation

will flash. Use the “PLUS“ button to set the correct day of week.

10. Set 12 or 24 Hour Time Mode:

Press the “SET” button a tenth time and the 12 or 24 Hour Time

Mode digits will flash. Use the “PLUS“ button to set the time mode to

either a 12 or 24 hour clock.

11. Set Temperature Mode - °F or °C:

Press the “SET” button an eleventh time and the Temperature Mode

abbreviation will flash. Use the “PLUS“ button to set the temperature

mode to °F or °C.

Daylight Saving Time

x The National Institute of Standards and Technology and WWVB

encode a special DST “bit” in the WWVB transmission for DST.

x Your La Crosse Technology® clock will read this information (only if

"DST" is set to "On") and automatically advance the time one hour in

the spring and back an hour in the fall.

x Arizona and Indiana: If you live in an area that does not recognize

DST you must de-activate Daylight Saving Time by setting "DST" to

"OFF"

x See "Set Daylight Saving Time ON/OFF" on page 4 for instructions.

Setting the Daily Alarms:

xTo turn the alarm on:

Press the "ALARM" button. The LCD will display the alarm icon .

Produkt Specifikationer

Mærke:	La Crosse Technology
Kategori:	Vækkeur
Model:	WS-8119U-IT-B

Har du brug for hjælp?

Hvis du har brug for hjælp til La Crosse Technology WS-8119U-IT-B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vækkeur La Crosse Technology Manualer

La Crosse Technology 404-2658 Manual

1 August 2025

La Crosse Technology 433-29917 Manual

31 Juli 2025

La Crosse Technology 433-3267TH Manual

31 Juli 2025

La Crosse Technology 65906 Manual

31 Juli 2025

La Crosse Technology 404-4292 Manual

15 Juli 2025

La Crosse Technology 404-3028B Manual

17 Juni 2025

La Crosse Technology 404-59907 Manual

8 Juni 2025

La Crosse Technology 404-80017 Manual

7 Juni 2025

La Crosse Technology 404-3028 Manual

9 April 2025

La Crosse Technology 404-3028A Manual

9 April 2025

Vækkeur Manualer

Nyeste Vækkeur Manualer

Techno Line WS 8017 Manual

1 August 2025

Ikea BONDIS 906.017.09 Manual

27 Juli 2025

ADE CK 2302 Manual

26 Juli 2025

Ikea SÖNDRUM 305.408.65 Manual

19 Juli 2025

Ikea NUFFRA 205.408.37 Manual

18 Juli 2025

Ikea PLUTTIS 105.408.52 Manual

18 Juli 2025

Ikea SÖNDRUM 705.408.73 Manual

18 Juli 2025

Ikea TJALLA 605.408.83 Manual

18 Juli 2025

Ikea SLÅTTIS 905.780.92 Manual

18 Juli 2025

Ikea KORVTRÄD 005.703.35 Manual

18 Juli 2025