LabNation Smartscope Manual

LabNation Måleudstyr Smartscope

Læs gratis den danske manual til LabNation Smartscope (4 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om LabNation Smartscope, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

SmartScope A11/A12

User’s Manual

For laboratory use only

www.lab-nation.com

Operation instructions

For all instructions regarding installation, usage and operation of the SmartScope, please visit

http://www.lab-nation.com/smartscope/manual

Safety Instructions

Review the following safety precautions carefully before operating the device to avoid any personal injuries

or damages to the device and any products connected to it. To avoid potential hazards use the device as

specied by this user’s guide only.

Use proper accessories. Use only the cables and accessories that are certied and supplied by

LabNation.

Connect and Disconnect Properly. Do not connect or disconnect probes or test leads while they

are connected to a voltage source.

Connect and Disconnect Properly. Connect the probe output to the measurement device before

connecting the probe to the circuit under test. Disconnect the probe input and the probe reference

lead from the circuit under test before disconnecting the probe from the measurement device.

Use Proper Probes. To avoid shock hazard, use a properly rated probe for your measurement.

Avoid Circuit or Wire Exposure. Do not touch exposed connections or components when power is

on. Do not touch any parts of the SmartScope, or any objects connected to the SmartScope,

whenever any ground clip of the probes are connected to anything else than ground/earth.

Do Not Operate With Suspected Failures. If suspected damage occurs with the device, have it

inspected by qualied service personnel before further operations.

Do not operate in Wet/Damp Conditions.

Do not operate in an Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Do not connect any part of the SmartScope to voltages higher than 20V, or lower than -20V.

- Connect ground clip to earth only, never to elevated voltages!

Produkt Specifikationer

Mærke:	LabNation
Kategori:	Måleudstyr
Model:	Smartscope

Har du brug for hjælp?

Hvis du har brug for hjælp til LabNation Smartscope stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr LabNation Manualer

LabNation Smartscope Manual

31 August 2024

LabNation SmartScope A11 Manual

31 August 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025