LaCie 12big Rack Serial 2 Manual

LaCie Disk array 12big Rack Serial 2

Læs gratis den danske manual til LaCie 12big Rack Serial 2 (17 sider) i kategorien Disk array. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13 anmeldelser. Har du et spørgsmål om LaCie 12big Rack Serial 2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/17

12big Rack Serial 2

Quick Install Guide

LaCie Quick Install Guide 1

1. INTRODUCTION

1.1. Safe Handling

A LaCie 12big Rack Serial 2 enclosure can weigh up to 26kg (57lb). Do not try to lift it by yourself.

Do not lift the enclosure by the handles on the PCMs. They are not designed to take the weight.

1.2. Safety

All plug-in modules and blank plates are part of the ﬁre enclosure and must only be removed when a replacement can

be immediately added. The system must not be run without all modules or blanks in place.

Permanently unplug the unit before you move it or if you think it has become damaged in any way.

IMPORTANT: The enclosure MUST be grounded before applying power.

The enclosure must only be operated from a power supply input voltage range of 100-240 VAC.

The plug on the power supply cord is used as the main disconnect device. Ensure that the socket outlets are located near

the equipment and are easily accessible.

When powered by multiple AC sources, disconnect all supply power for complete isolation.

In order to comply with applicable safety, emission and thermal requirements no covers should be removed and all bays

must be populated with plug-in modules.

The power connection should always be disconnected prior to removal of a PCM from the enclosure.

A safe electrical earth connection must be provided to the power supply cords. Check the grounding of the enclosure

before applying power.

Provide a suitable power source with electrical overload protection to meet the requirements laid down in the technical

speciﬁcation.

When bifurcated power cords (‘Y’ leads) are used, they must only be connected to a supply range of 200-240 V.

A faulty PCM must be replaced with a fully operational module within 24 hrs.

Do not remove a faulty PCM unless you have a replacement model of the correct type ready for insertion.

CAUTION: If this equipment is used in a manner not speciﬁed by LaCie, the protection provided by the equipment may be

impaired.

CAUTION: The optional RJ45 socket on the I/O module, it is for Ethernet connection only and must not be connected to a

telecommunications network.

EN ENGLISH

Produkt Specifikationer

Mærke:	LaCie
Kategori:	Disk array
Model:	12big Rack Serial 2
Vægt:	32200 g
Relativ luftfugtighed ved drift (H-H):	8 - 80 %
Driftstemperatur (T-T):	5 - 40 °C
Dimensioner (BxDxH):	443.7 x 550 x 87.9 mm
Effektkrav:	100-240VAC, 48-62Hz
Driftshøjde:	0 - 2133 m
Grænseflade til lagerdisk:	Serial ATA II
Dataoverførselshastighed:	3 Gbit/sek.
HDD hastighed:	7200 rpm
Antal installerede lagerdiske:	12
Kapacitet af datalagringsdrev:	2000 GB
Strømforsyningens kapacitet (PCU):	300 W
Oprindelig kapacitet:	24000 GB