Lasko FH620 Manual


Læs gratis den danske manual til Lasko FH620 (4 sider) i kategorien Ventilator. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Lasko FH620, eller vil du spørge andre brugere om produktet?

Side 1/4
NEW 3/21 8 FH620ES
SERVICIO AL CLIENTE:
Línea gratuita (800) 233-0268. Correo electrónico: producthelp@lasko.com
Nuestro equipo de Servicio al Cliente está disponible para ayudarle con preguntas sobre productos, ubicaciones de los centros de reparación y repuestos. Se puede
comunicar con nuestro equipo de Servicio al Cliente de lunes a viernes, de 8 a.m. a 5 p.m. hora del Este. Por favor tenga disponible el número de modelo, así como
también el tipo y estilo
(ubicados en la parte inferior de su producto). Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Por favor no envíe el producto a esta dirección) www.lasko.com
LOS REPUESTOS PARA PRODUCTOS DISCONTINUADOS, OBSOLETOS Y ALGUNOS OTROS PRODUCTOS PODRÍAN NO ESTAR DISPONIBLES. DEBIDO A RAZONES
DE SEGURIDAD, MUCHOS COMPONENTES ELECTRÓNICOS Y LA MAYORÍA DE LOS COMPONENTES DE LOS CALEFACTORES NO ESTÁN DISPONIBLES AL
CONSUMIDOR PARA SU INSTALACIÓN O REEMPLAZO.
El manual imprimió en la China
GARANTÍA LIMITADA DE LASKO PRODUCTS, LLC (VÁLIDO EN EE.UU., SUS TERRITORIOS, Y CANADÁ ÚNICAMENTE)
QUÉ CUBRE ESTA GARANTÍAS: Este producto está garantizado contra defectos de mano de obra y/o materiales.
CUÁNTO DURA ESTA GARANTÍA: Esta garantía se extiende únicamente al comprador original del producto y dura tres (3) años a partir de la fecha original de compra o hasta
que el comprador original del producto venda o transfiera el producto, cualesquiera de ambas que ocurriera en primer lugar.
QUÉ HARÁ LASKO: Lasko, a opción propia, reparará o reemplazará cualquier parte o partes que demuestren ser defectuosas o reemplazará el producto completo por
el mismo modelo u otro comparable. Para todas las reclamaciones de garantía, se debe devolver el producto a Lasko Products, LLC a cargo del cliente con la prueba de
compra dentro del período de garantía. Comuníquese con el departamento de atención al cliente de Lasko para obtener una Autorización de Devolución (“RA”, por sus
siglas en inglés). NO devuelva los productos sin una RA o no se procesará la reclamación de la garantía.
QUÉ NO CUBRE ESTA GARANTÍA: Esta garantía no tiene validez si el producto fue dañado o falló debido a un accidente, manipulación u operación inadecuadas, daño en
el envío, abuso, mal uso, reparaciones no autorizadas hechas o el intento de hacerlas, o el uso del producto para servicio comercial o no residencial. Esta garantía no cubre
los costos de envío para la devolución de productos a Lasko para su reparación o reemplazo. Lasko abonará los cargos de envío de devolución a Lasko con posterioridad
a las reparaciones o el reemplazo bajo garantía.
CUALESQUIERA Y TODAS LAS GARANAS, EXPCITAS O IMPCITAS (INCLUYENDO, SIN LIMITACIÓN, CUALESQUIERA GARANA IMPLÍCITA DE COMERCIABILIDAD),
DURAN TRES AÑOS A PARTIR DE LA FECHA ORIGINAL DE COMPRA O HASTA QUE EL COMPRADOR ORIGINAL DEL PRODUCTO VENDA O TRANSFIERA EL
PRODUCTO, CUALESQUIERA DE AMBAS QUE OCURRIERA EN PRIMER LUGAR Y EN NINN CASO LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA
EXPLÍCITA O IMPLÍCITA INCLUIRÁ (I) DAÑOS INCIDENTALES O POR CONSECUENCIA POR CUALQUIER CAUSA QUE FUERE, O (II) REEMPLAZO O REPARACIÓN
DE CUALESQUIERA FUSIBLES HOGAROS, CORTA-CIRCUITOS O TOMACORRIENTES. INDEPENDIENTEMENTE DE CUALQUIER DECLARACIÓN CONTRARIA, EN
NINN CASO LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPCITA O IMPCITA PODRÁ EXCEDER EL PRECIO DE COMPRA DEL PRODUCTO
Y DICHA RESPONSABILIDAD TERMINARÁ AL VENCIMIENTO DEL PERÍODO DE GARANA.
Algunos estados y provincias no permiten limitaciones sobre la duración de una garantía implícita, o sobre la exclusión o limitación de los daños incidentales o por
consecuencia, por lo tanto dichas exclusiones o limitaciones podrían no aplicarse en su caso. Esta garantía le otorga a usted derechos legales específicos. Usted también
podría tener otros derechos que varían de estado en estado y de provincia en provincia.
Se requiere prueba de compra antes que se acepte un reclamo bajo garantía.
AUTO ECO THERMOSTAT
Al presionar los botones ( ) o ( ) mientras se encuentra en las configuraciones de
energía ALTA o BAJA, se encenderá la función Auto Eco
.
1. Para fijar una temperatura específica en la habitación, presione los botones ( ) o
( ) hasta la temperatura deseada. La pantalla ahora reflejará el símbolo de Auto
Eco y la temperatura destellará. El Unidad está ahora en modo Auto Eco
.
2. Cuando se alcance la temperatura en la cual desea establecer la unidad, la
temperatura fijada destellará varias veces y luego la pantalla volverá a indicar la
temperatura ambiente actual y cambiará gradualmente a medida que cambie la
temperatura ambiente. NOTA: La pantalla de la temperatura no indica la tempera-
tura del aire caliente que emite el Unidad.
3. El calentador funcionará a ALTO calor cuando la temperatura ambiente sea menor
que la temperatura establecida.
4. El calefactor funcionará con BAJA temperatura cuando la temperatura ambiente
alcance la temperatura establecida y seguirá funcionando con BAJA temperatura
hasta que la temperatura ambiente alcance 2 grados Fahrenheit por encima de la
temperatura establecida.
5. El calentador se apagará una vez que la temperatura ambiente sea superior a 2
grados Fahrenheit por encima de la temperatura establecida. El ventilador segui
funcionando durante 15 segundos después de que se apague el elemento calefactor.
Todo esto ocurre automáticamente con la tecnología Auto Eco
de Lasko. Para des-
activar la función Auto Eco
, apague el Unidad o presione el botón ( ).
NOTA: En el modo Auto Eco, el Calentador mostrala temperatura ambiente ac-
tual en grados Fahrenheit. Presione los botones ( ) y ( ) al mismo tiempo
para mostrar los grados Celsius. Presione los mismos dos botones juntos
nuevamente para volver a mostrar los grados Fahrenheit.
CONTROL REMOTO
Todas las funciones realizadas con el Control Remoto operan del mismo modo que
los controles manuales.
1. El control requiere 2 baterías AAA de 1.5 Vcc (no incluídas).
2. No mezcle baterías viejas y nuevas. No mezcle baterías alcalinas, estándar
(carbono-cinc) o recargables (níquel-cadmio).
3. NO ARROJE LAS BATERÍAS AL FUEGO. LAS BATERÍAS PUEDEN EXPLOTAR O
SUFRIR PÉRDIDAS.
4. Siempre compre el tamaño y grado correctos de pilas más adecuados para el
uso previsto.
5. Reemplace todas las pilas de un conjunto al mismo tiempo.
6. Limpie los contactos de las pilas y tambn los del dispositivo antes de la
instalación de las mismas.
7. Asegúrese de que las pilas estén instaladas correctamente con respecto a la
polaridad (+ y -).
8. Retire las pilas del equipo que no se va a utilizar durante un período prolongado.
9. Retire las pilas usadas con prontitud.
Si usted pierde su mando a distancia, por favor Cliente de llamada Serive para ordenar
un reaplacement en (800) 233-0268, de lunes a viernes, entre las 8 a.m. y las 5 p.m.
(Horario Estándar del Este de los Estados Unidos).
ELEMENTOS DE SEGURIDAD
1. Hay un protector de sobrecarga térmica incorporado para evitar el sobrecalentamiento.
2. Si se alcanza una temperatura de sobrecalentamiento, el Unidad se apagará automáticamente. Sólo podrá retomar el funcionamiento cuando el usuario reinicie la unidad.
Para Reiniciar el Unidad:
1. Desconecte el Unidad y espere 10 minutos hasta que la Unidad se enfríe.
2. Después que el Unidad se haya enfriado, conecte la unidad a un tomacorriente eléctrico de 120V~ y siga las instrucciones de funcionamiento descriptas en este manual.
CONSEJOS DE SOLUCIÓN DE PROBLEMAS
Si su Unidad se apaga inesperadamente o no funciona, el elemento de seguridad arriba mencionado podría haber sido activado para evitar el sobrecalentamiento.
1. Asegúrese que el cable eléctrico esté conectado a un tomacorriente eléctrico en funcionamiento.
2. Revise si las bateas en el mando a distancia son nuevas y están apropiadamente instalados.
3. Verifique la posición de su Termostato. El Unidad puede haberse apagado por haber alcanzado la posición de temperatura deseada.
4. Si su Unidad opera durante varios minutos y se apaga repetidamente, es posible que el mismo requiera limpieza. Ver la sección de Mantenimiento abajo.
REPARACIONES: Para cualquier reparación, que no sea de mantenimiento general por parte del usuario, por favor contacte a nuestro equipo de Servicio al Cliente al (800)
233-0268 de Lunes a Viernes de 8 a.m. a 5 p.m.
LUBRICACION: Los rodamientos estan lubricados permanentemente de por vida.
ALMACENAMIENTO: Almacene el Unidad con estas instrucciones en la caja original en un lugar fresco y seco.
DISPOSICIÓN: Los materiales de empaque de cartón corrugado son reciclables. Para desechar este producto de manera ecológicamente responsable, comuníquese con su
proveedor de servicio de desechos local o visite www.1800recycling.com
®.
MANTENIMIENTO
Para reducir el riesgo de choque eléctrico e incendio por favor obedezca las siguientes instrucciones.
Limpiar el Unidad regularmente ayudará a mantener su eficiencia.
- Siempre desconecte el cable eléctrico antes de mover, reparar o limpiar.
- NUNCA coloque el Unidad dentro de o cerca de agua. NO SUMERJA EL UNIDAD EN AGUA
- Limpie el Unidad solamente con una aspiradora equipada con un accesorio de cepillo; la aspiradora quitará el polvo y los desperdicios
del interior del Unidad.
- Aspire las parrillas de entrada cada dos semanas; esto ayudará a mantener el rendimiento óptimo del Unidad.
- Use un cepillo de dientes u otro cepillo de cerdas suaves para aflojar suavemente cualquier polvo que no haya sido retirado por la aspiradora
- NUNCA intente desarmar el Unidad.
- Limpie el cuerpo del Unidad únicamente con un trapo suave.
- NUNCA use ALCOHOL o SOLVENTES tales como gasolina, bencina, disolvente de pinturas u otros limpiadores duros.
NEW 3/21 1 FH620ES
Since 1906
Tower Heater Fan
with Remote Control
Instruction Manual
READ AND SAVE THESE INSTRUCTIONS
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage!
This Unit is for residential use only. It is not intended to be used in commercial, industrial or agricultural settings.
Have a Question? Need a Part?
Please Do Not Return Product to Store!
Contact Lasko Customer Service:
(800) 233-0268 Monday-Friday 8AM - 5PM EST.
(Valid in the USA, its Territories, and CANADA Only)
Used for Model:
FH620
Register Your Product Today
www.lasko.com/product-registration/
You will benefit from:
- Efficient and enhanced support
- Future product updates
NEW 3/21 2 FH620ES
SAVE THESE INSTRUCTIONS
Read all instructions before using this Unit.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, these instructions and warnings should always be
followed to reduce the risk of fire, electrical shock and injury to persons:
CAUTION
Always place the Unit on a stable, flat, level surface when operating, to avoid the chance of the Unit overturning. Locate the Power Cord so the Unit or other
objects are not resting on it. DO NOT run Power Cord under carpeting. DO NOT cover Power Cord with throw rugs, runners, or similar coverings as this may
cause cord to overheat. Arrange Power Cord away from room traffic and where it will not be tripped over.
This Unit is HOT when in use. To avoid burns, do not let bare skin touch hot surfaces. Always use handle when moving this Unit. Keep combustible materials, such as
furniture, pillows, bedding, papers, clothes and curtains at least 3 feet (0.9 m) from the front of the Unit and keep them at least 1 foot (0.3 m) from the sides and rear.
This Unit is not intended for use in wet or damp locations. This Unit is not intended for use in bathrooms, laundry areas and similar indoor locations. NEVER locate
a Unit where it may fall into a bathtub or other water container.
DO NOT use Unit outdoors.
This Unit is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric
Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical requirements for Agricultural Buildings. THIS UNIT DOES
NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).
This Unit is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes or standards
relating to electrical requirements for Hazardous locations. THIS UNIT DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).
Remote controls for other appliances or electronic equipment can sometimes interfere with the operation of this Unit. If this occurs, move the Unit to another location.
Keep Unit remote control unit away from chairs and your bed where it may be sat or laid upon and inadvertently turn on the Unit.
Model FH620
Lasko Products, LLC
820 Lincoln Avenue
West Chester, PA
19380
www.lasko.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes and modifications
made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.
“NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.”
WARNING
WARNING
PLUG UNITS DIRECTLY INTO A 120V WALL OUTLET/RECEPTACLE ONLY. NEVER USE WITH AN EXTENSION CORD. DO NOT PLUG UNIT INTO
ANY OTHER CORD CONNECTED DEVICE, SUCH AS A POWER STRIP, SURGE PROTECTOR, MULTIPLE OUTLET ADAPTER, CORD REEL OR
OUTLET-TYPE AIR FRESHENER. THE USE OF SUCH DEVICES MAY CREATE A FIRE HAZARD. DO NOT PLUG MULTIPLE DEVICES IN THE SAME
OUTLET OR ON SAME CIRCUIT AS UNIT.
FAULTY WALL OUTLET CONNECTIONS MAY CAUSE THE WALL OUTLET TO OVERHEAT. BE SURE THAT UNIT PLUG FITS TIGHTLY INTO OUTLET
BEFORE EACH USE. DURING USE, CHECK TO MAKE CERTAIN THE UNIT PLUG IS NOT OVERHEATING. IF NECESSARY HAVE A QUALIFIED
ELECTRICIAN CHECK AND/OR REPLACE THE WALL OUTLET. DO NOT USE THIS UNIT WITH ANY SOLID STATE SPEED CONTROL DEVICES.
Make certain that the power source conforms to the electrical requirements of the Unit.
Extreme caution is necessary when any Unit is used by or near children or invalids. The Unit should not be left operating unattended. Never leave
children unattended when the Unit is on or plugged in.
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
DO NOT use the Unit in areas where gasoline, paint, or flammable liquids are used or stored. DO NOT use Unit in locations where flammable or
explosive chemicals are stored, or in wet atmospheres.
Do not operate any Unit with a damaged cord or plug or after the Unit malfunctions, or has been dropped or damaged in any manner. To disconnect
Unit, turn the Unit OFF then remove the plug from the outlet.
Always unplug Unit when not in use. Unplug power cord before servicing or moving the Unit.
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock, fire, or damage the
Unit. Do not block or tamper with the Unit in any manner while it is in operation.
Do not block air intakes or exhaust in any manner. Do not place on soft surfaces, like a bed, where openings may become blocked. Do not depend
on the on/off switch as the sole means of disconnecting power when servicing or moving the Unit. Always unplug the power cord.
NEW 3/21 7 FH620ES
1
5
4
Partes Incluidas
2. Introduzca el cable eléctrico a través
del orificio grande en el centro de la
Montura de la Base de Apoyo.
Ensamblaje
3
3. Asegure la Montura de la Base de
Apoyo a la parte inferior del Cuerpo
con (4) Tornillos de Mariposa.
1. Empuje a los jefes en la Base de
Soporte A en las ranuras del jefe en la
Base de Soporte B.
1 Cuerpo
5 Base de Soporte B2 Control Remoto
4 Base de Soporte A
3 Tornillos Mariposa
2
Controles
Botón de Temporizador
El temporizador se puede configurar para 8 horas.
Continúe pulsando el Botón del Temporizador
para llegar a la configuración de tiempo deseada.
Botón de Oscilación de Base
Presione para Iniciar/Detener la función de
oscilación de la base.
* Botón Auto Eco( )+
Presione para Aumentar la temperatura
ambiente deseada.
* Botón Auto Eco (-)
Presione para Disminuir la temperatura
ambiente deseada.
Botón de Velocidad del Ventilador
La Velocidad del Ventilador se puede ajustar a
Alta Velocidad (F4), Velocidad Media (F3), Ve-
locidad Baja (F2) o Velocidad Súper Baja (F1).
Botón de Modo de Calor
El calor se puede ajustar a Calor Alto (H3),
Calor Medio (H2) Calor Bajo (H1) o calor alto
y la velocidad de ventilador super baja (HF) .
Botón de Encendido del Calefactor
ENCENDIDO/APAGADO el Calefactor
presionando el Botón de Encendido.
Botón de Encendido del Ventilador
ENCENDIDO/APAGADO el Ventilador
presionando el Botón de Encendido.
* PARA UNA DESCRIPCN MÁS DETALLADA
DE FUNCIÓN AUTO ECO , VER PÁGINA 8


Produkt Specifikationer

Mærke: Lasko
Kategori: Ventilator
Model: FH620

Har du brug for hjælp?

Hvis du har brug for hjælp til Lasko FH620 stil et spørgsmål nedenfor, og andre brugere vil svare dig