Lasko Performance 2501 Manual

Lasko Ventilator Performance 2501

Læs gratis den danske manual til Lasko Performance 2501 (4 sider) i kategorien Ventilator. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Lasko Performance 2501, eller vil du spørge andre brugere om produktet?

Side 1/4
Rev. A 8/10 82085485
12" TABLE FAN
MODEL 2501
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE,
INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL
SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE!
KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
SAVE THESE INSTRUCTIONS
Rev. A 8/10 1 2085485
Después de apagar el Ventilador, desconecte la unidad del
tomacorriente eléctrico.
VELOCIDAD: Ajuste la
velocidad del ventila-
dor con el Control De
Velocidad de la base.
(Figura 9)
3 – Velocidad Alta
2 – Velocidad Mediana
1 – Velocidad Baja
INCLINACION: Este Ventilador está equipado de Cabeza de
Ventilador de ángulo múltiple para la Circulación del aire por toda
habitación o cuarto. Siga lo que se indica a continuación para
graduar propiamente el "ángulo de inclinación" del Ventilador.
1. Ponga una mano sobre el soporte exactamente por debajo del
Cuello del Ventilador.
2. Ponga la otra mano sobre la parte superior del Ventilador.
3. Empuje o hale suavemente la Cabeza del Ventilador hasta que
quede en la posición deseada.
OSCILACION: Empuje la perilla ubicada en la parte superior de la
caja del motor para hacer que la cabeza del Ventilador se mueva
de un lugar hacia otro. (Figuras 7 y 8)
Hacia Arriba:
Estacionario Hacia Adelante: Oscilar
Figura 7 Figura 8
FUNCIONAMIENTO
Control de
Velocidad
REPARACIONES: Para cualquier reparación, que no sea de
mantenimiento general por parte del usuario, por favor contacte
a nuestro equipo de Servicio al Cliente al (800) 233-0268 de Lunes
a Viernes de 8 a.m. a 5 p.m
ALMACENAMIENTO: Almacene el Ventilador con estas
instrucciones, en la caja original en un lugar fresco y seco.
LUBRICACION: Los rodamientos estan lubricados
permanentemente de por vida.
MANTENIMIENTO
- Siempre desconecte el cable eléctrico antes de
trasladar, reparar o limpiar.
- NUNCA coloque el Ventilador dentro de o cerca de agua.
- Las parrillas desmontadas se pueden sumergir
para ser limpiadas con un detergente y agua.enjuga
templados todas las otras partes con tela suave
humedecida con agua y detergente templado sólo.
SEQUE TODO DESPIDE COMPLETAMENTE ANTES
DE VOLVER A MONTAR. Después que cualquier
conservación o atender a, vuelven a montar
completamente la unidad como descrito en este
manual de la instrucción antes de conectar de nuevo
a la alimentación.
- NUNCA use ALCOHOL o SOLVENTES tales como
gasolina, bencina, disolvente para pinturas u otros
limpiadores duros.
Para reducir el riesgo de choque eléctrico e incendio,
por favor obedezca las siguientes instrucciones.
This Fan is for residential use only.
It is not intended to be used in commercial, industrial or agricultural settings.
GARANTÍA LIMITADA DE LASKO PRODUCTS, INC. (NO VÁLIDO EN MÉXICO)
QUÉ CUBRE ESTA GARANTÍAS: Este producto está garantizado contra defectos de mano de obra y/o materiales.
CUÁNTO DURA ESTA GARANTÍA: Esta garantía se extiende únicamente al comprador original del producto y dura un (1) año a partir de la fecha
original de compra o hasta que el comprador original del producto venda o transfiera el producto, cualesquiera de ambas que ocurriera en primer lugar.
QUÉ HARÁ LASKO: Durante el período de garantía, Lasko, a opción propia, reparará o reemplazará cualquier parte o partes que demuestren ser
defectuosas o reemplazará el producto completo por el mismo modelo u otro comparable.
QUÉ NO CUBRE ESTA GARANTÍA: Esta garantía no tiene validez si el producto fue dañado o falló debido a un accidente, manipulación u operación
inadecuadas, daño en el envío, abuso, mal uso, reparaciones no autorizadas hechas o el intento de hacerlas. Esta garantía no cubre los costos de
envío para la devolución de productos a Lasko para su reparación o reemplazo. Lasko abonará los cargos de envío de devolución a Lasko con
posterioridad a las reparaciones o el reemplazo bajo garantía.
CUALESQUIERA Y TODAS LAS GARANTÍAS, EXPLÍCITAS O IMPLÍCITAS (INCLUYENDO, SIN LIMITACIÓN, CUALESQUIERA GARANTÍA IMPLÍCITA
DE COMERCIABILIDAD), DURAN UN AÑO A PARTIR DE LA FECHA ORIGINAL DE COMPRA O HASTA QUE EL COMPRADOR ORIGINAL DEL
PRODUCTO VENDA O TRANSFIERA EL PRODUCTO, CUALESQUIERA DE AMBAS QUE OCURRIERA EN PRIMER LUGAR Y EN NINGÚN
CASO LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA INCLUIRÁ (I) DAÑOS INCIDENTALES O POR
CONSECUENCIA POR CUALQUIER CAUSA QUE FUERE, O (II) REEMPLAZO O REPARACIÓN DE CUALESQUIERA FUSIBLES HOGAREÑOS,
CORTA-CIRCUITOS O TOMACORRIENTES. INDEPENDIENTEMENTE DE CUALQUIER DECLARACIÓN CONTRARIA, EN NINGÚN CASO
LA RESPONSABILIDAD DE LASKO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA PODRÁ EXCEDER EL PRECIO DE COMPRA DEL
PRODUCTO Y DICHA RESPONSABILIDAD TERMINARÁ AL VENCIMIENTO DEL PERÍODO DE GARANTÍA.
Algunos estados y provincias no permiten limitaciones sobre la duración de una garantía implícita, o sobre la exclusión o limitación de los daños
incidentales o por consecuencia, por lo tanto dichas exclusiones o limitaciones podrían no aplicarse en su caso. Esta garantía le otorga a usted
derechos legales específicos. Usted también podría tener otros derechos que varían de estado en estado y de provincia en provincia.
Se requiere prueba de compra antes que se acepte un reclamo bajo garantía.
SERVICIO AL CLIENTE:
Línea gratuita (800) 233-0268. Correo electrónico: producthelp@laskoproducts.com
Nuestro equipo de Servicio al Cliente está disponible para ayudarle con preguntas sobre productos, ubicaciones de los centros de
reparación y repuestos. Se puede comunicar con nuestro equipo de Servicio al Cliente de lunes a viernes, de 8 a.m. a 5 p.m. hora del
Este. Por favor tenga disponible el número de modelo, así como también el tipo y estilo (ubicados en la parte inferior de su producto).
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Por favor no envíe el producto a esta dirección)
www.laskoproducts.com
Figura 9
Rev. A 8/10 22085485 Rev. A 8/10 72085485
1. Inserte la parte delantera del Asamblaje Del Motor hacia la parte
delantera de la Base. Empuje asi atras en el Asamblaje del Mo-
tor (Figura 1) y acomodelo completamente en su posicion.
4. Asiente la Rejilla Trasera Tuerca De Plástico y sujetela con la
HACIA LA DERECHA. (Figura 4)
5. Deslice la Hélice en el eje del motor. (Figura 5) (Alinear la Ranura
Del Cubo Pasador de la tapa con el del eje del motor. Figura 5A)
6. Para asegurar la Helice, enroscarla hasta que quede
apretada en el Cubo de la Tapa haciéndola girar
Hacia la Izuierda.
Asamblaje
Del Motor
Base
Figura 1
Figura 5
2. Alinear la leneta de la Rejilla Trasera con la ranura en la parte
superior de la cubierta delantera del . Motor (Figura 2)
3. Inclinar la cabeza del ventilador hacia atrás. Coloque la Re-
jilla Trasera en el Motor. (La marca UP indica la parte superior.)
(Figura 3)
Figura 6
Figura 3
Figura 2
ARMADO
Motor
Rejilla Trasera
Motor
Rejilla Trasera
Figura 4
Tuerca De
Plástico
1. Coloque el ventilador sobre una superficie firme y nivelada.
ADVERTENCIA: Los tacos de plástico o hule, tales como las
patas de esta unidad, pueden pegarse a la superficie de los muebles.
La unidad podría dejar un residuo capaz de oscurecer, manchar o
dejar marcas permanentes en el acabado de ciertas superficies de
muebles, incluyendo superficies y pisos de madera.
2. Conecte el cable eléctrico a un tomacorriente de 120 voltios.
Asegúrese que el enchufe encaje firmemente en el
tomacorriente.
Cua ndo los enchuf es queda n flojos en los
tomacorrientes, pueden deslizarse parcial o
completamente fuera del tomacorriente con un leve
movimiento del cable adosado. Los tomacorrientes
en este estado podrían sobrecalentarse y representar
un grave peligro de incendio; si está cubierto por una
cortina o tela, el riesgo de incendio es aún mayor.
FUNCIONAMIENTO
GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electrical shock and injury to persons, including the following:
SAVE THESE INSTRUCTIONS
Read all instructions before using this Fan.
1. Make certain the power source conforms to the electrical requirements of the Fan.
2. Make certain that the room is equipped with a working smoke detector.
3. Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause re, electrical shock,
or injury to persons.
4. To reduce the risk of personal injury and electric shock, the Fan should not be played with or placed where small children can reach it.
5. Unplug power cord before installing, servicing, or moving the Fan.
DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING
OR MOVING THE FAN. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG FAN BEFORE
LEAVING THE AREA. NEVER LEAVE CHILDREN UNATTENDED WHEN THE FAN IS ON OR PLUGGED IN.
6. This Fan must be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres NOT
where gasoline, paint or flammable liquids are used or stored.
7. DO NOT use Fan in or near a window. Rain may create an electrical hazard.
8. Completely assemble Fan, according to instructions, before connecting to power supply.
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS FAN
WITH ANY SOLID STATE SPEED CONTROL DEVICES.
9. Where possible, avoid the use of extension cords because the extension cord may overheat and cause a fire. If you must use an exten-
sion cord, minimize the risk of overheating by using the shortest cord possible and ensuring that it is UL listed. use a single NEVER
extension cord to operate more than one Fan. Do not plug Fan into any other cord connected device, such as a power strip, cord
reel, surge protector, multiple outlet adapters or outlet-type air fresheners. The use of such devices may create a fire hazard.
10. operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner. NEVER
11. insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, NEVER
or damage the Fan. To reduce the risk of fire, block or tamper with the Fan in any manner while it is in operation.DO NOT
12. Always place the Fan on a stable, flat, level surface when operating, to avoid the chance of the Fan overturning. Locate the Power
Cord so the Fan or other objects are not resting on it. Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be
tripped over.
13. This Fan is not intended for use in wet or damp locations. locate a Fan where it may fall into a bathtub or other water con-NEVER
tainer. use Fan where flammable liquids are used or stored.NEVER
14. use Fan outdoors. NEVER
15. This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please
refer to National Electric Code (NEC) Article 547-7 (2008), or applicable state or local codes or standards relating to electrical require-
ments for Agricultural Buildings. THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 547-7 (2008).
16. This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or
local codes or standards relating to electrical requirements for Hazardous locations. THIS FAN DOES NOT MEET THE REQUIRE-
MENTS OF NEC ARTICLE 500 (2008).
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way. Match wide blade of plug to wide slot. Fully
insert. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. DO NOT attempt to defeat this safety feature. This plug is a safety feature. It contains a safety
device (fuse) that should not be removed. Discard product if the attachment plug is damaged. To reduce the
risk of fire, electric shock and personal injury, DO NOT remove, replace, repair or tamper with the originally
supplied plug. If the Fan does not function properly, it may be due to the safety device incorporated in this
plug. Call 800-233-0268, Monday - Friday, between 8:00 a.m. and 5:00 p.m. Eastern. If the plug warning label
is missing or damaged, call the toll free number for a replacement label.
Rejilla Trasera
7. Con la Cabeza del Ventilador inclinada hacia atrás y centrada,
alinear el Adorno de tal manera que la divisa quede horizontal.
Insertar la parte inferior de la Rejilla Delantera dentro de la Rejilla
Trasera. La proyección de la parte inferior de la Rejilla Trasera
debe quedar entre dos Alambres de la parte delantera. Cerrar
apretando la parte delantera contra la parte trasera empezando
en la parte superior y continuar cerrando hacia abajo ambos
lados. NO NECESITO EL GANCHOS DE LA REJILLA PARA
ENSAMBLE. (Figura 6)
Helice
Tapa de
Ventilador
Figura 5
Figura 5A
Pasador
R a n u r a
Del Cubo


Produkt Specifikationer

Mærke: Lasko
Kategori: Ventilator
Model: Performance 2501
Produktfarve: Hvid
Antal hastigheder: 3
Placering: Bord
Ventilator diameter: 304.8 mm

Har du brug for hjælp?

Hvis du har brug for hjælp til Lasko Performance 2501 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ventilator Lasko Manualer

Lasko

Lasko 2017 Manual

18 Marts 2025
Lasko

Lasko U11300 Manual

17 Marts 2025
Lasko

Lasko H20685 Manual

17 Marts 2025
Lasko

Lasko 4443 Manual

10 Marts 2025
Lasko

Lasko 4930 Manual

10 Marts 2025
Lasko

Lasko S18654 Manual

4 Februar 2025
Lasko

Lasko H20600 Manual

30 Januar 2025

Ventilator Manualer

Nyeste Ventilator Manualer