Lectrosonics RATPAC Manual

Lectrosonics Ikke kategoriseret RATPAC

Læs gratis den danske manual til Lectrosonics RATPAC (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Lectrosonics RATPAC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

RATPAC

Connector Kit

INSTRUCTION MANUAL

Rio Rancho, NM, USA

www.lectrosonics.com

Fill in for your records:

Serial Number:

Purchase Date:

Build a right angle TA5 or TA3 connector.

MODEL#

LECTROSONICS, INC.

Parts Description and Details

The RATPAC (Right Angle T connector PACkage) is a

versatile kit for building a right angle connector for use

with the SR receiver or Lectrosonics transmitters. The

3-pin conﬁguration is normally used for the rear panel

audio outputs of the SR receiver. The 5-pin conﬁgura-

tion is the standard connector for most belt pack trans-

mitters and the front panel outputs on the 5P version

of the SR receiver.

The kit includes a standard TA5F connector, a 3-pin in-

sert, modiﬁed cable clamp, modiﬁed backshell, tubing,

set screws with wrench, and a machined aluminum

right angle housing.

TA3F

Modiﬁed

TA5F parts

Spare set screw and

wrench included

The right angle housing is a unique machined alumi-

num part that adapts a TA Series connector to work

with a range of cable sizes and 3-pin or 5-pin inserts.

Keyway to

prevent cable

clamp from

turning

Threaded

hole for set

screw

A standard TA connector sleeve is used with either a

3-pin or 5-pin insert and a modiﬁed cable clamp. The

insert nests inside the sleeve and is held in place by a

spacer and metal retainer. The sleeve is held in place

by two set screws in the machined aluminum housing.

The shrink tubing can be used wherever it is useful to

provide an additional strain relief. Cable is not included

in the kit and is shown only to illustrate the use of the

large and small silicon tubing.

Connector

sleeve

3-pin/5-pin

insert

Plastic

spacer

Metal

retainer

Right angle

housing

Set

screws

Allen

wrench

Standard

cable

clamp

Modiﬁed

backshell

Large

silicon

tubing

Standard

backshell

Small

silicon

tubing

Shrink

tubing

The tab on the cable

clamp nests into the

keyway on the right

angle housing

Completed connector

with larger cable.

Completed connector

with smaller cable.

Assembly

The example shown here illustrates an assembly with

a larger cable and 3-pin insert, which could be used

with the SREXT rear panel on the SR receiver.

Produkt Specifikationer

Mærke:	Lectrosonics
Kategori:	Ikke kategoriseret
Model:	RATPAC

Har du brug for hjælp?

Hvis du har brug for hjælp til Lectrosonics RATPAC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Lectrosonics Manualer

Lectrosonics SMWB/X Manual

3 Marts 2025

Lectrosonics SMV/941 Manual

3 Marts 2025

Lectrosonics LMb/E01 Manual

3 Marts 2025

Lectrosonics SMB/E01 Manual

3 Marts 2025

Lectrosonics HMa/X Manual

3 Marts 2025

Lectrosonics LMb/E06 Manual

3 Marts 2025

Lectrosonics SMDB/E05 Manual

3 Marts 2025

Lectrosonics SMDB/E01 Manual

3 Marts 2025

Lectrosonics SMWB-E06-B1 Manual

3 Marts 2025

Lectrosonics SSM/E02 Manual

3 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025

Garritan Harps Manual

14 Juni 2025

Marshall CV-H20-HF Manual

14 Juni 2025

Aiphone IXW-MAA Manual

14 Juni 2025

Rival HM-743 Manual

14 Juni 2025

Lutec Avony Manual

14 Juni 2025

Giordani G-SAFE & PLAY Manual

14 Juni 2025

Gourmia GAF799 Manual

14 Juni 2025

Arendo 307503 Manual

14 Juni 2025

Hughes & Kettner Tube 100 Manual

14 Juni 2025