Lectrosonics SMDWB-E07 Manual

Lectrosonics Ikke kategoriseret SMDWB-E07

Læs gratis den danske manual til Lectrosonics SMDWB-E07 (30 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Lectrosonics SMDWB-E07, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/30
SMWB Series
Wireless Microphone Transmitters and Recorders
SMWB, SMDWB, SMWB/E01, SMDWB/E01, SMWB/E06, SMDWB/E06, SMWB/E07-941,
SMDWB/E07-941, SMWB/X, SMDWB/X
Featuring
Digital Hybrid Wireless® Technology
US Patent 7,225,135
INSTRUCTION MANUAL
Rio Rancho, NM, USA
www.lectrosonics.com
Fill in for your records:
Serial Number:
Purchase Date:
SMWB SMDWB
SMWB Series
LECTROSONICS, INC.2
Introduction
The design of the SMWB transmitter delivers the ad-
vanced technology and features of Digital Hybrid Wire-
less® in a Lectrosonics belt-pack transmitter at a modest
cost. Digital Hybrid Wireless® combines a 24-bit digital
audio chain with an analog FM radio link to eliminate a
compandor and its artifacts, yet preserve the extended
operating range and noise rejection of the nest analog
wireless systems.
The housing is a rugged, machined aluminum package
with a standard Lectrosonics 5-pin input jack for use with
electret lavaliere mics, dynamic mics, musical instrument
pickups and line level signals. The LEDs on the keypad
allow quick and accurate level settings without having to
view the receiver. The unit is powered by AA batteries,
one battery in the SMWB and two in the SMDWB. The
antenna port uses a standard 50 ohm SMA connector.
Switching power supplies provide constant voltages to
the transmitter circuits from the beginning to the end of
battery life, with output power remaining constant over
the life of the battery. The input amplier uses an ultra
low noise op amp. Input gain is adjustable over a 44 dB
range, with a DSP-controlled dual envelope input limiter
providing a clean 30 dB range to prevent overload from
signal peaks.
About Digital Hybrid Wireless®
All wireless links suer from channel noise to some
degree, and all wireless microphone systems seek to
minimize the impact of that noise on the desired sig-
nal. Conventional analog systems use compandors for
enhanced dynamic range, at the cost of subtle artifacts
(known as “pumping” and “breathing”). Wholly digital
systems defeat the noise by sending the audio informa-
tion in digital form, at the cost of some combination of
power, bandwidth, operating range and resistance to
interference.
The Lectrosonics Digital Hybrid Wireless
system over-
comes channel noise in a dramatically new way, digitally
encoding the audio in the transmitter and decoding it in
the receiver, yet still sending the encoded information
via an analog FM wireless link. This proprietary algorithm
is not a digital implementation of an analog compandor
but a technique which can be accomplished only in the
digital domain.
Since the RF link between transmitter and receiver is
FM, channel noise will increase gradually with increased
operating range and weak signal conditions, however,
the Digital Hybrid Wireles system handles this situation
elegantly with rarely audible audio artifacts as the receiv-
er approaches its squelch threshold.
In contrast, a purely digital system tends to drop the
audio suddenly during brief dropouts and weak signal
conditions. The Digital Hybrid Wireless
system simply
encodes the signal to use a noisy channel as eciently
and robustly as possible, yielding audio performance
that rivals that of purely digital systems, without the
power, noise and bandwidth problems inherent in digital
Table of Contents
Introduction 2 ............................................................................
About Digital Hybrid Wireless® 2 .............................................................................
Servo Bias Input and Wiring 3 ...............................................
DSP-controlled Input Limiter 3 ..............................................
Recorder function 3 ...............................................................
Compatibility withmicroSDHC memory cards 3 ....................
Features 4 ..................................................................................
Battery Status LED Indicator 4 ..............................................
Menu Shortcuts 4 ..................................................................
IR (infrared) Sync 4 ................................................................
Battery Installation 5 ..............................................................
Formatting SD Card 5 ..............................................................
IMPORTANT 5 .........................................................................
iXML HEADER SUPPORT 5 ...................................................
Turning Power ON 6 .................................................................
Short Button Press 6 .............................................................
Long Button Press 6 ..............................................................
Menu Shortcuts 6 ..................................................................
Transmitter Operating Instructions 7 .....................................
Recorder Operating Instructions 7 .........................................
SMWB Main Menu 8 .................................................................
SMWB Power Button Menu 9 ..................................................
Setup Screen Details 10 ............................................................
Locking/Unlocking Changes to Settings 10 ...........................
Main Window Indicators 10 .....................................................
Connecting the Signal Source 10 ............................................
Turning Control Panel LEDs ON/OFF 10 .................................
Helpful Features on Receivers 10 ...........................................
Files 10 .....................................................................................
Record or Stop 11 ...................................................................
Adjusting the Input Gain 11 .....................................................
Selecting Frequency 11 ...........................................................
Selecting Frequency Using Two Buttons 12 ...........................
About Overlapping Frequency Bands 12 ................................
Selecting the Low Frequency Roll-off 12 ................................
Selecting the Compatibility (Compat) Mode 12 .....................
Selecting Step Size 13 .............................................................
Selecting Audio Polarity (Phase) 13 ........................................
Setting Transmitter Output Power 13 .....................................
Setting Scene and Take Number........................................ 13
Recorded File Naming 13 .......................................................
SD Info 13 .................................................................................
Restoring Default Settings 13 .................................................
5-Pin Input Jack Wiring 14 .........................................................
Microphone Cable Termination
for Non-Lectrosonics Microphones 15 .............................
Input Jack Wiring for Dierent Sources 16 ..............................
Microphone RF Bypassing 17 .................................................
Line Level Signals 17 ...............................................................
Firmware Update 18 ...................................................................
Recovery Process 19 .................................................................
Declaration of Conformity 19 ....................................................
Silver Paste on SM Series Transmitter Thumbscrews 20 .......
Straight Whip Antennas 21 ........................................................
Supplied Accessories............................................................ 22
Optional Accessories 23 ............................................................
LectroRM 24 ................................................................................
Specications 25 ........................................................................
Troubleshooting 26 .....................................................................
Service and Repair 28 ................................................................
Returning Units for Repair 28 ..................................................

Produkt Specifikationer

Mærke: Lectrosonics
Kategori: Ikke kategoriseret
Model: SMDWB-E07

Har du brug for hjælp?

Hvis du har brug for hjælp til Lectrosonics SMDWB-E07 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Lectrosonics Manualer

Lectrosonics

Lectrosonics SMWB/X Manual

3 Marts 2025
Lectrosonics

Lectrosonics SMV/941 Manual

3 Marts 2025
Lectrosonics

Lectrosonics LMb/E01 Manual

3 Marts 2025
Lectrosonics

Lectrosonics SMB/E01 Manual

3 Marts 2025
Lectrosonics

Lectrosonics HMa/X Manual

3 Marts 2025
Lectrosonics

Lectrosonics LMb/E06 Manual

3 Marts 2025
Lectrosonics

Lectrosonics SMDB/E05 Manual

3 Marts 2025
Lectrosonics

Lectrosonics SMDB/E01 Manual

3 Marts 2025
Lectrosonics

Lectrosonics SMWB-E06-B1 Manual

3 Marts 2025
Lectrosonics

Lectrosonics SSM/E02 Manual

3 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Simrad

Simrad Active Imaging HD (Thru-Hull) Manual

14 Juni 2025
Garritan

Garritan Harps Manual

14 Juni 2025
Marshall

Marshall CV-H20-HF Manual

14 Juni 2025
Aiphone

Aiphone IXW-MAA Manual

14 Juni 2025
Rival

Rival HM-743 Manual

14 Juni 2025
Lutec

Lutec Avony Manual

14 Juni 2025
Giordani

Giordani G-SAFE & PLAY Manual

14 Juni 2025
Gourmia

Gourmia GAF799 Manual

14 Juni 2025
Arendo

Arendo 307503 Manual

14 Juni 2025
Hughes & Kettner

Hughes & Kettner Tube 100 Manual

14 Juni 2025