Lectrosonics SSM/E06 Manual


Læs gratis den danske manual til Lectrosonics SSM/E06 (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Lectrosonics SSM/E06, eller vil du spørge andre brugere om produktet?

Side 1/24
SSM
Digital Hybrid Wireless® Micro Transmitter
SSM, SSM-941, SSM/E01, SSM/E01-B2, SSM/E02, SSM/E06, SSM/X
INSTRUCTION MANUAL
Rio Rancho, NM, USA
www.lectrosonics.com
Fill in for your records:
Serial Number:
Purchase Date:
Quick Start Steps
1) Install a good battery and turn power on (see pages
5 and 8).
2) Set the compatibility mode to match the receiver
(see page 9).
3) Connect the signal source and adjust input gain for
optimum modulation level (see page 10).
4) Set Step Size and frequency to match receiver (see
pages 8 and 9). Also refer to the receiver manual for
the RF scanning procedure to nd a clear operating
frequency.
5) Turn on the receiver and verify that solid RF and
audio signals are present (see receiver manual).
WARNING: Moisture, including talent’s sweat,
will damage the transmitter. Wrap the SSM
in a plastic bag or other protection or use the
SSMCVR to avoid damage.
SSM, SSM-941, SSM/E01, SSM/E02, SSM/E06, SSM/X
LECTROSONICS, INC.
2


Produkt Specifikationer

Mærke: Lectrosonics
Kategori: Ikke kategoriseret
Model: SSM/E06

Har du brug for hjælp?

Hvis du har brug for hjælp til Lectrosonics SSM/E06 stil et spørgsmål nedenfor, og andre brugere vil svare dig