Digital Microscope
EN
Never, under any circumstances, look directly at the Sun,
another bright source of light or at a laser through this device,
as this may cause PERMANENT RETINAL DAMAGE
and may lead to BLINDNESS.
Microscope parts
The kit includes: microscope, rechargeable battery, power cable, USB cable, RCA cable,
Levenhuk DTX installation CD user guide calibration scale, cleaning cloth, , .
2
LCD display
MicroSD card slot
Fine focus knob
Microscope optical tube
Stage
Coarse focus knob
Focus lock knob
Shutter button
Brightness adjustment wheel
Magnification adjustment wheel
Power cable socket
RCA socket
USB socket
Battery compartment
Battery status indicator
Function keys
Microscope assembly
Open the battery compartment at the bottom of the microscope base. Insert the battery into the
battery compartment matching the indicated polarity. The battery has to be fully charged before
turning the microscope on for the first time. Plug the power cable into the power cable socket
on the microscope body (11) and connect it to a power source. The battery status indicator (15)
will turn red. Once the battery is fully charged, the indicator will go out. You can now disconnect
the microscope from the power source and turn it on. The fully-charged battery allows you to
use the microscope for two hours. The illumination will grow dim and the image quality will
decrease to inform you that the battery is low. Charge the battery, as described above.
A microSD card (purchased separately) is required to save captured images and recorded videos.
Turn the microscope off and insert the microSD card into the corresponding slot on the
microscope body until it locks in place with a click. Do not apply excessive force when inserting
the microSD card. Try rotating the card, if it does not lock in place with ease. Format the card
before using it.
To turn the microscope on press the power button (16). To turn the microscope off press
the power button (16) again (refer to Power saving for more information).
00013/01618
5.0М
Image capture mode icon
Sequence capture mode icon
Captured image counter Total number /
of images that may be captured
(based on the current resolution)
MicroSD status icon
Current image resolution
Battery status indicator
Note: interface icons may be hidden by pressing
the magnification adjustment wheel (9).
