Lexmark E120n Manual

Lexmark Printer E120n

Læs gratis den danske manual til Lexmark E120n (12 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Lexmark E120n, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Quick Reference

Understanding the Operator Panel

The printer operator panel has two buttons and six lights (Continue is both a light and a button).

Lights indicate the status of the printer. Buttons are used to continue or cancel the current print job.

When the printer is turned on, all lights cycle as a self test is performed. Also, when the printer is

reset, or when a printer setting is changed in the menus, all lights cycle.

• Press and release Continue to resume printing.

• Press and release Continue twice quickly to display the secondary light sequence.

• Press and release Cancel to cancel the current job.

• Press and hold Cancel until all of the lights come on to reset the printer.

Understanding the operator panel lights

The operator panel lights mean different things, depending on their sequence. Lights that are off, on,

and/or blinking indicate printer conditions such as printer status, intervention, or service.

Use the light sequence table to find the message being indicated, then click the message for more

information.

Ready / Data

Toner Low/Replace PC Kit

Load / Remove Paper

Paper Jam

ContinueCancel

Error

Understanding the Operator Panel

Light sequence

Primary light sequence Secondary light sequence

Message

Continue

Ready / Data

Toner Low/Replace PC Kit

Load / Remove Paper

Paper Jam

Error

Continue

Ready / Data

Toner Low/Replace PC Kit

Load / Remove Paper

Paper Jam

Error

Ready/Power Saver

Busy

Resolution reduced

Waiting

Cancel job/Reset printer

Flushing buffer

Invalid engine code

Not ready

Printing font list or menus settings page

Programming engine code or system

code

Restoring factory defaults

Cartridge region mismatch

Missing cartridge/Defective cartridge

detected

Open door

Continue on =

Continue blinking =

Ready / Data on =

Ready / Data blinking =

Other panel lights on =

Other panel lights blinking =

Produkt Specifikationer

Mærke:	Lexmark
Kategori:	Printer
Model:	E120n
Vægt:	6900 g
Relativ luftfugtighed ved drift (H-H):	8 - 80 %
Driftstemperatur (T-T):	16 - 32 °C
Udskrivningsteknologi:	Laser
Maksimal opløsning:	600 x 600 dpi
Udskrivningshastighed (sort, normal kvalitet, A4/amerikansk papirformat):	19 sider pr. minut
Maksimal ISO A-serie papirstørrelse:	A4
Samlet inputkapacitet:	165 ark
Samlet outputkapacitet:	50 ark
Maksimal driftscyklus:	10000 sider pr. måned
Intern hukommelse:	16 MB
Dimensioner (BxDxH):	388 x 370 x 250 mm
Certificering:	FCC Class B, UL 60950-1 3rd Edition, U.S. FDA, IEC 320-1, CSA, ICES Class B, Energy Star, CE Class B, CB IEC 60950-1, IEC 60825-1, GS (TÜV), SEMKO, UL AR, CS, TÜV Rh, N Mark, ACA C-tick Class B, CCC Class B, BSMI Class B, MIC, EK Mark, PSB, VCCI
Pakkens dimensioner (BxDxH):	485 x 29 x 325 mm
Maksimal indgangskapacitet:	165 ark
Mac kompabilitet:	Ja
Bæredygtighedscertifikater:	ENERGY STAR
Processorfrekvens:	183 Mhz
Maksimal intern hukommelse:	16 MB
Driftshøjde:	0 - 2500 m
Farve:	Ingen
Lydtryksniveau (udskrivning):	49 dB
Tid til første side (sort, normal):	8 sek./side
Maksimal kapacitetsydelse:	50 ark
Understøttede netværksprotokoller (IPv4):	TCP/IP IPv4
I/O-porte:	Ethernet 10/100BaseTX (RJ-45)\nUSB
Lydeffektniveau (standby):	26 dB
Netværksfunktioner:	LPR/LPD, Direct IP (Port 9100), IPP, HTTP, Enhanced IP (Port 9400), FTP, TFTP
Maksimal printstørrelse:	210 x 297 mm
Understøttede medietyper:	Card Stock, Envelopes, Paper Labels, Plain Paper, Transparencies
Blækpatron:	2000
Standard indgangs magasiner:	150