LG DC778 Manual

LG Ikke kategoriseret DC778

Læs gratis den danske manual til LG DC778 (36 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 89 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 45 anmeldelser. Har du et spørgsmål om LG DC778, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/36

Preparation

Connections

Caution:



Make sure this unit is connected directly to the TV.

Set the TV to the correct video input channel.



Do not connect this unit’s AUDIO OUT jack to the

phone in jack (record deck) of your audio system.

Connecting to a TV & Decoder

(or Satellite)

Make one of the following connections, depending on

the capabilities of your existing equipment.

Basic connection (AV)

1. Connect the EURO AV1 AUDIO/VIDEO on the rear

panel of this unit to the SCART input socket on the

TV using a SCART lead (S1).

2. Some TV broadcasters transmit encoded television

signals which you can only see with a purchased or

rented decoder. You can connect such a decoder

(descrambler) to this unit (S2).

1. Connect the jacks on theVIDEO (DVD/VCR OUT)

DVD Player to the corresponding in jacks on the TV

using the video cable (V).

2. Connect the Left and Right or AUDIO (DVD/VCR

OUT) jacks of the DVD+VCR to the audio left/right in

jacks on the TV using the audio cables (A1).

Note:

The encoded television signals (CANAL+ or PRE-

MIERE) are not decoded in the 1W Mode (see p. 25).

Basic connection (RF)

1. Connect the RF antenna cable from your indoor/

outdoor antenna to AERIAL jack on the rear panel of

this unit.

2. Connect the supplied RF antenna cable from the

RF.OUT jack on the rear panel of this unit to your

television’s Antenna Input (R).

DVD exclusive out connection

Component Video connection

1. Connect the COMPONENT/PROGRESSIVE SCAN

VIDEO OUT jacks on the DVD Player to the

corresponding in jacks on the TV using the Y Pb Pr

cable (C).

2. Connect the Left and Right jacks ofAUDIO OUT

this unit to the audio left/right in jacks on the TV

using the audio cables (A2).

Progressive Scan connection



If your television is a high-definition or “digital ready”

television, you may take advantage of the DVD

Player’s progressive scan output for the highest

video resolution possible.



If your TV does not accept the Progressive Scan

format, the picture will appear scrambled if you try

Progressive Scan on the DVD Player.

1. Connect the COMPONENT/ PROGRESSIVE SCAN

VIDEO OUT jacks on the DVD Player to the corre-

sponding in jacks on the TV using the Y Pb Pr cable.

2. Connect the Left and Right jacks of theAUDIO OUT

this unit to the audio left/right in jacks on the TV

using the audio cables.

Notes:



Set the Progressive to “On” on the setup menu for

progressive signal, see page 17.



Progressive scan does not work with the analog video

connections (yellow VIDEO OUT jack).

AUDIO INPUT

AERIAL

Rear of TV

Rear of this unit (Basic connection)

COMPONENT VIDEO INPUT/

PROGRESSIVE SCAN

Pb Y

VIDEO

INPUT

Decoder (or Satellite)

SCART INPUT

RV A1

AUDIO INPUT

AERIAL

Rear of TV

Rear of this unit (DVD exclusive out connection)

COMPONENT VIDEO INPUT/

PROGRESSIVE SCAN

Pb Y

VIDEO

INPUT SCART INPUT

C A2

Connections (Continued)

Connecting to Optional Equipment

Connecting to an amplifier equipped with two chan-

nel analog stereo or Dolby Pro Logic II/Pro Logic

Connect the Left and Right DVD/VCR AUDIO OUT or

AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit

to the audio left and right in jacks on your amplifier,

receiver or stereo system, using the audio cables.

Connecting to an amplifier equipped with two channel

digital stereo (PCM) or to an Audio/ Video receiver

equipped with a multi-channel decoder (Dolby

Digital™, MPEG 2 or DTS)

1. Connect one of this unit’s DIGITAL AUDIO OUT jack

(COAXIAL) to the corresponding in jack on your

amplifier. Use an optional digital (coaxial) audio

cable.

2. You will need to activate this unit’s digital output.

(See “AUDIO” on page 18).

Digital Multi-channel sound

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your unit (MPEG 2, Dolby

Digital and DTS). Check the receiver manual and the

logos on the front of the receiver.

Warning:

Due to the DTS Licensing agreement, the digital output

will be in DTS digital out when DTS audio stream is

selected.

Notes:



If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.



To see the audio format of the current DVD in the

On-Screen Display, press AUDIO.

AUDIO INPUT

DIGITAL INPUT

COA IAL

Amplifier (Receiver)

Rear of this unit

Digital multi-channel connection

(DVD exclusive out connecttion)

DVD exclusive out

DVD/VCR OUT

Rear of this unit

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are registered trade-

marks of Dolby Laboratories.

DTS and DTS Digital Out are trademarks of Digital

Theater Systems, Inc.

Produkt Specifikationer

Mærke:	LG
Kategori:	Ikke kategoriseret
Model:	DC778

Har du brug for hjælp?

Hvis du har brug for hjælp til LG DC778 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret LG Manualer

21 Juli 2025

20 Juli 2025

20 Juli 2025

20 Juli 2025

19 Juli 2025

17 Juli 2025

15 Juli 2025

8 Juli 2025

8 Juli 2025

6 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech EAI-3100 Manual

30 Juli 2025

Deye SUN-M180G4-EU-Q0-I Manual

30 Juli 2025

Crestron STIRP Manual

30 Juli 2025

Intellinet 790741 Manual

30 Juli 2025

Saris Edge 2-Bike Manual

30 Juli 2025

Advantech ROM-3310 Manual

30 Juli 2025

Advantech EKI-1751I Manual

30 Juli 2025

Advantech ICR-1601W Manual

30 Juli 2025

C2G 29341 Manual

30 Juli 2025

Advantech ITA-8120 Manual

30 Juli 2025