LG GP10NG20 Manual

LG Ikke kategoriseret GP10NG20

Læs gratis den danske manual til LG GP10NG20 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om LG GP10NG20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

• Please pay attention to handling Electrostatic

Sensitive Devices, you may use anti-static

products such as wrist straps, heel straps, mats

to protect your body from electrostatic.

• Make sure you have a personal computer with

one or two open USB ports before connecting

the drive to your computer.

• Power for all other devices should be turn off

before attaching the cables.

Connect the drive to the computer as shown in

figure.

1Connect the USB 2.0 (Y type) cable to

the drive.

2Connect the other end of the USB 2.0

cable to your computer.

3The drive may get its power from the PC

USB power. All systems may not meet

USB power requirements and full

performance may not be achieved.

In this case, connect to the USB power

cable.

When the computer is ready, confirm that the

drive is detected. And then, insert the supplied

software CD into the drive and install the

software.

• Please do not connect the USB cables by any means other than specified above.

Using the wrong type of cable with this drive can cause it to malfunction.

• The appliance is not intended for use by young children or infirm persons without supervision.

Young Children should be supervised to ensure that they do not play with appliance.

• If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord

extension set on electrical portable outlet device must be positioned so that it is not subject to splashing

or ingress of moisture.

Installation

NOTES

Connecting to computer

Hardware Installation

NOTES

USB Power cable

1. Disc Tray

2. Drive activity indicator

The LED is used to indicate the operation of

drive.

3. Eject Button

4. Emergency Eject Hole

1. USB Connector (mini)

This connector is used to connect to the USB

2.0 cable.

Location and function of controls

Removing the USB converter cable (For Windows)

The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by

performing the following operation.

1. Stop the application software being currently used.

2. Click the icon “ ” of the taskbar located on your screen’s bottom right side.

3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”.

4. Click “Ok” and then remove the USB converter cable.

1 2 3 4

This following is the general figure of the design of the drive.

The drive’s appearance and specifications may change without prior notice.

Front

Rear

NOTE

Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup.

The removing procedure varies depending on your OS.

Produkt Specifikationer

Mærke:	LG
Kategori:	Ikke kategoriseret
Model:	GP10NG20

Har du brug for hjælp?

Hvis du har brug for hjælp til LG GP10NG20 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret LG Manualer

21 Juli 2025

20 Juli 2025

20 Juli 2025

20 Juli 2025

19 Juli 2025

17 Juli 2025

15 Juli 2025

8 Juli 2025

8 Juli 2025

6 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech EAI-3100 Manual

30 Juli 2025

Deye SUN-M180G4-EU-Q0-I Manual

30 Juli 2025

Crestron STIRP Manual

30 Juli 2025

Intellinet 790741 Manual

30 Juli 2025

Saris Edge 2-Bike Manual

30 Juli 2025

Advantech ROM-3310 Manual

30 Juli 2025

Advantech EKI-1751I Manual

30 Juli 2025

Advantech ICR-1601W Manual

30 Juli 2025

C2G 29341 Manual

30 Juli 2025

Advantech ITA-8120 Manual

30 Juli 2025