LG GP30NB20 Manual

LG Ikke kategoriseret GP30NB20

Læs gratis den danske manual til LG GP30NB20 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om LG GP30NB20, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

• Please pay attention to handling Electrostatic

Sensitive Devices, you may use anti-static

products such as wrist straps, heel straps, mats

to protect your body from electrostatic.

• Make sure you have a personal computer with

one or two open USB ports before connecting

the drive to your computer.

• Power for all other devices should be turn off

before attaching the cables.

Connect the drive to the computer as shown in

figure.

1Connect the USB 2.0 (Y type) cable to

the drive.

2Connect the other end of the USB 2.0

cable to your computer.

3The drive may get its power from the PC

USB power. All systems may not meet

USB power requirements and full

performance may not be achieved.

In this case, connect to the USB power

cable.

When the computer is ready, confirm that the

drive is detected. And then, insert the supplied

software CD into the drive and install the

software.

• Please do not connect the USB cables by any means other than specified above.

Using the wrong type of cable with this drive can cause it to malfunction.

• The appliance is not intended for use by young children or infirm persons without supervision.

Young Children should be supervised to ensure that they do not play with appliance.

• If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord

extension set on electrical portable outlet device must be positioned so that it is not subject to splashing

or ingress of moisture.

Installation

NOTES

Connecting to computer

Hardware Installation

NOTES

USB Power cable

1. Disc Tray

2. Drive activity indicator

The LED is used to indicate the operation of

drive.

3. Eject Button

4. Emergency Eject Hole

1. USB Connector (mini)

This connector is used to connect to the USB

2.0 cable.

Location and function of controls

Removing the USB converter cable (For Windows)

The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by

performing the following operation.

1. Stop the application software being currently used.

2. Click the icon “ ” of the taskbar located on your screen’s bottom right side.

3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”.

4. Click “Ok” and then remove the USB converter cable.

This following is the general figure of the design of the drive.

The drive’s appearance and specifications may change without prior notice.

Front

Rear

NOTE

Don’t remove the USB 2.0 cable when the busy indicator on the drive blinks, or during computer startup.

The removing procedure varies depending on your OS.

1 2 3 4

Produkt Specifikationer

Mærke:	LG
Kategori:	Ikke kategoriseret
Model:	GP30NB20
Vægt:	270 g
Produktfarve:	Sort
Dimensioner (BxDxH):	144 x 19 x 135.5 mm
Kompatible operativsystemer:	Windows Vista/Windows 7/Windows XP/MAC OS
Grænseflade:	USB 2.0
Intern:	Ingen
Optisk drevtype:	DVD±R/RW
Diskindlæsningstype:	Bakke
CD-læsehastighed:	- x
CD-skrivehastighed:	24 x
CD omskrivningshastighed:	- x
DVD-RW skrivehastighed:	8 x
DVD+R skrivehastighed:	8 x
DVD+RW skrivehastighed:	8 x
DVD-RAM skrivehastighed:	5 x
DVD+R læsehastighed:	6 x
DVD-RW læsehastighed:	6 x
DVD+RW læsehastighed:	8 x
DVD-ROM læsehastighed:	8 x