Lincoln Electric LT-7 Manual

Lincoln Electric Svejsemaskine LT-7

Læs gratis den danske manual til Lincoln Electric LT-7 (56 sider) i kategorien Svejsemaskine. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Lincoln Electric LT-7, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/56

Operator’s Manual

LT-7 Lightweight Tractor

www.lincolnelectric.com/register

Authorized Service and Distributor Locator:

www.lincolnelectric.com/locator

IM279-C | Issue D ate Sept-13

For use with machines having Code Numbers:

K227, K395 and K395-1

Save for future reference

Date Purchased

Code: (ex: 10859)

Serial: (ex: U1060512345)

THANK YOU FOR SELECTING

A QUALITY PRODUCT BY

LINCOLN ELEC TRIC.

Please examine Carton and equiPment For

damage immediately

When this equipment is shipped, title passes to the purchaser upon

receipt by the carrier. Consequently, Claims for material damaged in

shipment must be made by the purchaser against the transportation

company at the time the shipment is received.

saFety dePends on you

Lincoln arc welding and cutting equipment is designed and built with

safety in mind. However, your overall safety can be increased by

proper installation ... and thoughtful operation on your part.

DO NOT INSTALL, OPERATE OR REPAIR THIS EQUIPMENT

WITHOUT READING THIS MANUAL AND THE SAFETY PRECAUTIONS

CONTAINED THROUGHOUT. And, most importantly, think before you

act and be careful.

This statement appears where the information must be followed

exactly to avoid serious personal injury or loss of life.

This statement appears where the information must be followed to

avoid minor personal injury or damage to this equipment.

KeeP your head out oF the Fumes.

DON’T get too close to the arc. Use

corrective lenses if necessary to

stay a reasonable distance away

from the arc.

READ and obey the Material Safety

Data Sheet (MSDS) and the warning

label that appears on all containers

of welding materials.

USE ENOUGH VENTILATION or

exhaust at the arc, or both, to keep

the fumes and gases from your breathing zone and the general area.

IN A LARGE ROOM OR OUTDOORS, natural ventilation may be

adequate if you keep your head out of the fumes (See below).

USE NATURAL DRAFTS or fans to keep the fumes away from your

face.

If you de velop unusual symptoms, see your supervisor. Perhaps the

welding atmosphere and ventilation system should be checked.

wear CorreCt eye, ear & body ProteCtion

PROTECT your eyes and face with welding helmet

properly fitted and with proper grade of filter plate

(See ANSI Z49.1).

PROTECT your body from welding spatter and arc

flash with protective clothing including woolen

clothing, flame-proof apron and gloves, leather

leggings, and high boots.

PROTECT others from splatter, flash, and glare with

protective screens or barriers.

IN SOME AREAS, protection from noise may be

appropriate.

BE SURE protective equipment is in good condition.

Also, wear safety glasses in work area

AT A

AT AAT ALL

LLLL

TTI

IIM

MME

EES.

S.S.

SSP

PPEC

ECECI

IIA

AAL

L L SI

SISIT

TTUAT

UAT

UATUATI

IION

ONONS

DO NOT WELD OR CUT containers or materials which previously had

been in contact with hazardous substances unless they are properly

cleaned. This is extremely dangerous.

DO NOT WELD OR CUT painted or plated parts unless special

precautions with ventilation have been taken. They can release highly

toxic fumes or gases.

AAd

ddd

ddit

ititi

iio

oon

nna

aal

ll p

p pr

rrec

ececa

aau

uut

tti

iio

oon

nnar

arary

yy m

m mea

eaeas

ssu

uure

reres

PROTECT compressed gas cylinders from excessive heat, mechanical

shocks, and arcs; fasten cylinders so they cannot fall.

BE SURE cylinders are never grounded or part of an electrical circuit.

REMOVE all potential fire hazards from welding area.

ALWAYS HAVE FIRE FIGHTING EQUIPMENT READY FOR

IMMEDIATE USE AND KNOW HOW TO USE IT.

WARNING

CAUTION

Produkt Specifikationer

Mærke:	Lincoln Electric
Kategori:	Svejsemaskine
Model:	LT-7

Har du brug for hjælp?

Hvis du har brug for hjælp til Lincoln Electric LT-7 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Svejsemaskine Lincoln Electric Manualer

Lincoln Electric LF-74 Manual

4 Januar 2025

Lincoln Electric Idealarc DC-400 Manual

4 Januar 2025

Lincoln Electric Flextec 450 Manual

3 Januar 2025

Lincoln Electric Flextec 650 SUBARC Manual

3 Januar 2025

Lincoln Electric COOLARC 20 Manual

3 Januar 2025

Lincoln Electric POWER MIG 256 Manual

9 December 2024

Lincoln Electric Power MIG 260 Manual

9 December 2024

Lincoln Electric LN-8 Manual

9 December 2024

Lincoln Electric Zipline Boom Package Manual

11 September 2024

Lincoln Electric Vantage 566 Manual

5 September 2024

Svejsemaskine Manualer

Nyeste Svejsemaskine Manualer

Einhell NSG 180 F Manual

27 Marts 2025

Einhell NSG 230 F Manual

27 Marts 2025

Einhell NSG 270 F Manual

27 Marts 2025

Einhell RT-EW 150 Manual

10 Januar 2025

Anova SL160TIG Manual

5 Januar 2025

MSW S-SPOTTER 4200 Manual

3 Januar 2025

Duro D-ES 150 Manual

31 December 2025

Hilti X-ENP MXR Manual

30 December 2025

Herkules ES 150 Turbo Manual

29 December 2024

Topcraft TES 150 Turbo Manual

15 December 2024