Linksys Velop Pro 7 Manual

Linksys Ikke kategoriseret Velop Pro 7

Læs gratis den danske manual til Linksys Velop Pro 7 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Linksys Velop Pro 7, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Step 1

Download the Linksys App from the Apple App Store or the Android Play Store.

The Linksys App will guide you through the installation process and make the

entire setup experience as quick and easy as possible.

Step 2

Disconnect your old router, if separate from your modem.

Restart your modem by unplugging it and plugging it back in.

Connect your new Linksys Node.

Plug your Linksys Node into power.

Use the provided Ethernet cable to connect your modem to the Internet port on the Node.

Step 3

Open the Linksys App and follow the setup instructions.

The Linksys App will guide you through setting up your Nodes in a few easy steps:

Plugging in additional Nodes if applicable.

Customizing your WiFi name and password.

Securing your Node password.

Creating a Linksys Account for remote management of your network.

Optimizing the position of your Nodes.

Status Light

Give your Node a minute to start up.

The status light will go from blinking to solid blue when it’s ready for setup.

Node lights

Starting up

Wait for the Node to ﬁnish starting up.

Ready for setup

Open the Linksys App to complete setup.

Setup in progress

Follow instructions in the App.

Connected to the internet

Node is online, everything is good.

No Internet

Not online, check with your ISP for service interruptions.

Out of range

Node isn’t in range of another node. Move it closer.

If this is your node, make sure itprimary

is ﬁrmly connected to your modem.

Blue

(blinking)

Blue

White

(blinking)

White

Red

(blinking)

Modem or

Modem-RouterInternet

Linksys Node

Ethernet Cable

Installation Guide

Velop Pro 6E

Velop Pro 7

Produkt Specifikationer

Mærke:	Linksys
Kategori:	Ikke kategoriseret
Model:	Velop Pro 7
Bredde:	95 mm
Dybde:	95 mm
Højde:	221 mm
Produktfarve:	Hvid
Produkttype:	Mesh-system
Opbevaringstemperatur (T-T):	-20 - 60 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	10 - 90 %
Ethernet LAN-porte (RJ-45):	5
Wi-Fi-standarder:	Wi-Fi 6 (802.11ax), Wi-Fi 6E (802.11ax), Wi-Fi 7 (802.11be)
Processorkerner:	4
Forældrekontrol:	Ja
Driftstemperatur (T-T):	0 - 40 °C
Hurtig installationsvejledning:	Ja
Wi-Fi-bånd:	Tri-band (2,4 GHz/5 GHz/6 GHz)
Bedste Wi-Fi standard:	Wi-Fi 7 (802.11be)
WLAN dataoverførselshastighed (maks):	- Mbit/s
DC-in-stik:	Ja
Knap til nulstilling:	Ja
Servicekvalitet support (QoS):	Ja
Firewall sikkerhed:	Stateful Packet Inspection (SPI) firewall
Gæsteadgang:	Ja
LED-indikatorer:	Ja
AC-adapter inkluderet:	Ja
Processorfrekvens:	1.5 GHz
Antenne type:	Intern
Firmware kan opgraderes på følgende måder:	Automatisk opgraderingsguide
Ethernet-kabel:	Ja
Antal produkter inkluderet:	1 stk
Antal understøttede enheder:	4
SSID broadcast:	Ja
Funktioner til forældrekontrol:	Content filter, Pause the Internet, Time controls