4 GB/IE
Introduction / Safety advice
Folding stool
Introduction
Before using the item for the first time,
take time to familiarise yourself with the
product first. Read the following assembly
instructions and safety instructions carefully. Only
use the product as described and for the designated
areas of application. Please keep these instructions
in a safe place. If you hand this product on to a
third party, you must also pass on all documents
relating to the product.
Intended Use
This article is designed to be sat on in private
domestic areas indoors. Any use other than previ-
ously mentioned or any product modification is
prohibited and can lead to injuries and / or product
damage. The manufacturer is not liable for any
damages caused by any use other than for the
intended purpose. The product is not intended for
commercial use.
Description of parts
and features
1 Folding stool
2 Locking mechanism
Technical data
Dimensions: Folded out: approx. 30 x 46.5 x 30 cm
(w x h x d)
Folded up: approx. 30 x 71 x 5 cm
(w x h x d)
Material: Seat: PVC
Frame: Powder-coated steel
Upholstery: Foam
Non-slip feet: PE
Max. load: 100 kg
Scope of delivery
1 Folding stool
1 Set of operating instructions
Safety advice
KEEP ALL THE SAFETY ADVICE AND
INSTRUCTIONS IN A SAFE PLACE FOR FUTURE
REFERENCE!
RISK OF LOSS
OF LIFE OR ACCIDENT TO IN-
FANTS AND CHILDREN! Never-
leave children unsupervised with the packaging
materials. Danger of suffocation.
CAUTION! DANGER OF INJURY! Make
sure that no parts are damaged. Damaged
parts could adversely affect safety and proper
function.
CAUTION! DANGER OF
SHEARING OR CRUSHING IN-
JURY! Make sure you do not trap
your fingers when opening or closing the prod-
uct. A moment of inattention may result in a
shearing or crushing injury.
CAUTION! Do not leave children unattended!
The product is not a climbing frame or toy!
Make sure that people, especially children, do
not climb onto or lean against the product. The
product may overbalance and topple over.
Do CAUTION! FIRE HAZARD!
not position the product near an
open fire and / or radiant heaters.
Make sure that the product is set up on a solid
surface at ground level.
The product must be evenly loaded in such a
way that it cannot tip over.
Make sure that all welded seams are intact.
The safe use of the product can only be en-
sured if all parts have been correctly folded out
and secured.
Do not move the product when there is a load
on it.
64685_liv_Klapphocker_Content_LB3.indd 4 03.05.11 17:21
