Lorex ACCYARD1 Manual

Lorex Ikke kategoriseret ACCYARD1

Læs gratis den danske manual til Lorex ACCYARD1 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Lorex ACCYARD1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Package Contents

• Yard Sign with Solar LED Light and Rechargeable Battery

• Mounting Screws & Drywall Anchors (×2)

• Sign Post (3 pieces; 1 pre-attached to sign)

Dimensions

9.2"

233mm

11.8" / 300mm

Installation (YARD SIGN)

Getting Started

• Before installing the sign, press the power button on the underside of the solar

LED light. This will allow the battery to charge during the day and turn on the

light at night. It is recommended to check that the light comes on in a dark room

before installing the sign.

• Choose a location for the sign with plenty of direct sunlight exposure. Do not

install in a covered or shaded area.

• The solar panel requires at least 3-4 hours of direct sunlight per day.

Performance dependent on temperature and light exposure.

• For wall mounting, ensure you can safely drill into your selected mounting

location.

33.6"

853mm

1. Wearing protective

work gloves, push the

pointed end of Bar #3

into the ground. The

pointed side of the

bar should point the

opposite direction that

the sign will face.

NOTE: If the ground is

especially solid, tap the

bar into place using a

rubber mallet.

2. Press the spring-

loaded button on the

bottom of Bar #2 to

insert into the top of

Bar #3. Be careful not

to pinch your ﬁngers

between the bars.

3. Press the spring-

loaded button on the

top of Bar #2 to insert

into the top of Bar #1

(pre-attached to the

back of the sign). Be

careful not to pinch

your ﬁngers between

the bars.

To install the sign in the ground:

ATTENTION:

Choose a location for the sign with plenty of direct sunlight exposure.

Do not install in a covered or shaded area.

Bar #2

Bar #3

Bar #1

Spring-loaded

buttons

Installation (WALL SIGN)

To install the sign on a wall:

ATTENTION:

Choose a location for the sign with plenty of direct sunlight exposure.

Do not install in a covered or shaded area.

1. Remove the fastening

screws (see ) Figure 2

from the front of the

sign using a Phillips

head screwdriver (not

included). This removes

the back bar

to prepare the sign for

wall-mounting.

2. Drill holes for the

mounting screws and

plastic anchors (×2). The

holes must be level and

4.25” (108mm) apart

center-to-center.

3. Insert the anchors

ﬁrmly into the holes

(recommended to tap

anchors into place using

a rubber mallet).

4. Use a Phillips

screwdriver to insert

the mounting screws

into the anchors. Leave

approximately 5mm of

each screw outside of

4.25"

108mm

Mounting surface

Mounting

screw

Plastic

anchor

5mm

Mounting

screws (×2)

Plastic

anchors (×2)

Fastening

screws (×2)

Pointed side should face

the opposite direction of

the sign

* Side view

Figure 1 Figure 2

Figure 3

5. Line up the notches on the back of the solar LED light with

the protruding screws and push down on the sign to secure

it in place.

the anchor (see ).Figure 3

Safety Precautions

• The solar panel may require periodic cleaning to ensure it is capturing light

effectively. Use a damp cloth only. Do not use chemical cleaners.

• Do not dispose of the battery in regular garbage. Handle as hazardous waste.

Dispose according to local hazardous waste programs.

ACCYARD1_QSG_EN_R2

As our products are subject to continuous improvement, Lorex

reserves the right to modify product design, speciﬁcations and

prices, without notice and without incurring any obligation.

www.lorex.com

Quick Start Guide

Security Yard Sign

ACCYARD1

Produkt Specifikationer

Mærke:	Lorex
Kategori:	Ikke kategoriseret
Model:	ACCYARD1

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex ACCYARD1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Lorex Manualer

Lorex AUL-1B2 Manual

25 August 2025

Lorex AUL-1W3 Manual

25 August 2025

Lorex ALX27-012W Manual

25 August 2025

Lorex ALX27-M12W Manual

25 August 2025

Lorex D871A81B Manual

14 August 2025

Lorex DV9162 Manual

13 August 2025

Lorex D241A82B Manual

13 August 2025

Lorex LK100LK100-SL Manual

13 August 2025

Lorex LH0604P Manual

12 August 2025

Lorex AY41TR-KTK1-MTK1 Manual

12 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Philips Evnia 32M3C3540 Manual

30 Oktober 2025

Soler & Palau DUOVENT MODULAR XL DV Manual

30 Oktober 2025

Iogear GCS1228TAA3 Manual

30 Oktober 2025

Abus E212 Manual

30 Oktober 2025

Olimpia Splendid Bi2 SLIR Manual

30 Oktober 2025

EtherWAN EX24402 Manual

30 Oktober 2025

Abus Smartvest Pro APP45200 Manual

30 Oktober 2025

EtherWAN ED3501 Manual

30 Oktober 2025

Sage the Puck Sucker SCA800 Manual

30 Oktober 2025

Wimberley AP-606 Manual

30 Oktober 2025