Lorex E581CD-E Manual


Læs gratis den danske manual til Lorex E581CD-E (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om Lorex E581CD-E, eller vil du spørge andre brugere om produktet?

Side 1/2
Resources
Dimensions
Disclaimers
Package Contents
Safety Precautions
Installation Tips
Using the RJ45 Cable Gland (Optional)
E581CD_QSG_EN_R1
5MP HD Dome IP Camera
Mounting Kit*
Ethernet Extension Cable with Pre-attached RJ45
Cable Gland*
Use the camera only with compatible Lorex NVRs.
Read this guide carefully and keep it for future reference.
Follow all instructions for safe use of the product and handle with care.
Use the camera within given temperature, humidity and voltage levels
noted in the camera’s specifications.
Do not disassemble the camera.
Do not point the camera directly towards the sun or a source of
intense light.
Use only a regulated power supply with the product (optional). Use of a
non-regulated, non-conforming power supply can damage the product
and void the warranty.
Periodic cleaning may be required. Use a damp cloth only. Do not use
harsh cleaners or aerosol cleaners.
The supplied cable is rated for surface mounting only. Cables for in-wall
and floor-to-floor installations are sold separately (CMR type). These
and other cables are available at lorex.com.
Point the camera where there is the least amount of obstructions
(i.e., tree branches).
Install the camera where vandals cannot easily reach.
Secure cabling so that it is not exposed or easily cut.
This camera is rated for outdoor use. Installation in a sheltered
location is recommended.
* Per camera in multi-camera packs.
Copyright © 2019 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right
to modify product design, specifications and prices, without notice and without
incurring any obligation. E&OE. All rights reserved.
Quick Start Guide
English Version 1.0
E581CD SERIES
ATTENTION:
It is recommended to connect the camera to the NVR or an external PoE
switch. If using a DC power adapter (not included) with the camera, a
REGULATED power supply is REQUIRED for use with this camera. Use of
a non-regulated, non-conforming power supply can damage this product
and voids the warranty.
2.8" / 70mm
www.lorex.com
For a full list of compatible recorders, visit lorex.com/compatibility.
Not intended for submersion in water. Installation in a sheltered
location recommended.
This camera includes an Auto Mechanical IR Cut Filter. When the
camera changes between Day/Night viewing modes, an audible clicking
noise may be heard from the camera. This clicking is normal, and
indicates that the camera filter is working.
5MP HD Dome IP Camera
Need Help?
Visit us online for up-to-date software
and complete instruction manuals
Click on the Downloads tab
4
Visit lorex.com
Search for the model
number of your product
Click on your product
in the search results
3
2
1
The pre-attached RJ45 cable gland covers the camera’s Ethernet
connector and the RJ45 plug to provide weather-resistance and
protection from dust, dirt and other environmental contaminants.
To use the RJ45 cable gland:
RJ45 Cable
Gland Barrel
Camera Ethernet
Connector
NOTE: The RJ45 cable gland is weather-resistant. Seal the cap with
silicone and/or electrical tape for additional sealing if it will be exposed
to precipitation regularly.
Twist the RJ45 cable gland
barrel securely onto the
camera Ethernet connector.
3.7" / 93mm


Produkt Specifikationer

Mærke: Lorex
Kategori: Overvågningskamera
Model: E581CD-E

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex E581CD-E stil et spørgsmål nedenfor, og andre brugere vil svare dig