Lorex LKE383A Manual

Lorex Overvågningskamera LKE383A

Læs gratis den danske manual til Lorex LKE383A (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Lorex LKE383A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

• You can use a RJ45 coupler or switch (not included) to connect male

ends of Ethernet cable together.

• To extend the cable run beyond 300ft (92m), a switch will be required

(sold separately).

ATTENTION:

Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation

assumes no liability for use of its products that does not conform with local laws.

Audio is disabled by default. If needed, you can enable audio

through a Lorex NVR.

NOTE: These instructions are based on current NVR interface. For the most up-to-

date instructions, see your NVR’s instruction manual on www.lorex.com.

To enable camera audio:

1. In Live View, right-click anywhere on the screen to open the Quick Menu.

2. Click If prompted, enter the system user name and password. Main Menu.

3. Under on the left-side panel, click , then click the Settings Record Mainstream

tab.

4. Select a channel where an audio camera is connected next to .Channel

5. Check the checkbox to enable audio. Click Audio Save to apply changes.

6. Repeat steps 4 and 5 for any other audio cameras you want to enable audio for.

7. (Optional) Click the tab and perform the same steps to enable audio Substream

when viewing cameras through the computer or mobile applications.

Microphone

Audio Settings

LKE383A_QSG_EN_R2

4K HD IP Dome Security Camera with Audio

• 4K HD IP Dome Security Camera with Audio

• Mounting Kit*

• Ethernet Extension Cable*

• Weatherprooﬁng Cap*

• Allen Key*

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use of the product and handle with care.

• Use the camera within given temperature, humidity and voltage levels noted in the

camera’s speciﬁcations.

• Do not disassemble the camera.

• Do not point the camera directly towards the sun or a source of intense light.

• Use only the supplied regulated power supply provided with the product. Use of a non-

regulated, non-conforming power supply can damage the product and void the warranty.

• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-

based cleaners.

• The supplied cable is rated for surface mounting only. Cables for in-wall and ﬂoor-to-ﬂoor

installations are sold separately (CMR type). These and other cables are available at

lorex.com

* Per camera in multi-camera packs.

As our products are subject to continuous improvement, Lorex reserves the right

to modify product design, speciﬁcations and prices, without notice and without

Quick Start Guide

English Version 2.0

LKE383A SERIES

Package Contents

ATTENTION:

It is recommended to connect the camera to the NVR or an external PoE

switch. If using a DC power adapter (not included) with the camera, a

REGULATED power supply is REQUIRED for use with this camera. Use of

a non-regulated, non-conforming power supply can damage this product

and voids the warranty.

Safety Precautions

Dimensions

www.lorex.com

Extend the cable run for your camera. Additional extension cables sold

separately. See table below:

Cable Extension Options

Cable Type Max Cable Run

Distance

Max # of

Extensions

CAT5e (or higher) Ethernet cable 300ft (92m) 3

• For a full list of compatible recorders, visit lorex.com/compatibility

• Not intended for submersion in water. Installation in a sheltered location

recommended.

• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes

between Day/Night viewing modes, an audible clicking noise may be heard from

the camera. This clicking is normal, and indicates that the camera ﬁlter is working.

• For the smoothest possible 4K video streaming experience, connect your NVR

to a Gigabit router (use available 1000Mbps / 1Gbps ethernet port). If you are

connecting cameras to an external network switch, it is recommended to use a

10/100/1000Mbps port on a Gigabit network switch.

3.9” /

100mm

3.9” / 100mm

3.5” /

90mm

Need Help?

Visit us online for up-to-date software

and complete instruction manuals

Click on the Downloads tab

Visit lorex.com

Search for the model

number of your product

Click on your product

in the search results

Resources

Disclaimers

Produkt Specifikationer

Mærke:	Lorex
Kategori:	Overvågningskamera
Model:	LKE383A
Kode for international beskyttelse (IP):	IP66
Type:	IP-sikkerhedskamera
Bredde:	100 mm
Dybde:	100 mm
Højde:	90 mm
Vægt:	400 g
Produktfarve:	Hvid
Pakkevægt:	1920 g
Pakkedybde:	166 mm
Pakkebredde:	249 mm
Pakkehøjde:	166 mm
Wi-Fi:	Ingen
Bluetooth:	Ingen
Formfaktor:	Kuppel
Understøttede videotilstande:	1080p
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Format til analogt signal:	NTSC,PAL
Ethernet LAN-porte (RJ-45):	1
Ethernet LAN:	Ja
Understøttede videoformater:	HEVC/H.265
Driftstemperatur (T-T):	-30 - 60 °C
Maksimal opløsning:	3840 x 2160 pixel
Kabler inkluderet:	LAN (RJ-45)
Pakketype:	Kasse
Understøttede grafikopløsninger:	3840 x 2160
Forbindelsesteknologi:	Ledningsført
Strømkilde type:	DC,PoE
Kabellængde:	0.3 m
Monteringstype:	Loft/væg
Indbygget HDD:	Ingen
Understøttet placering:	Indendørs & udendørs
Indbygget mikrofon:	Ja
Samlet antal megapixels:	8 MP
Strømforbrug:	460 mA
Progressiv scanning:	Ja
Maksimal driftstilstand:	40 m
Dag/nat funktion:	Ja
Vandafvisende:	Ja
Kamerapanorering kontrol:	Ingen
Kontrol af kamerahældning:	Ingen
Minimumsbelysning:	0.7 Lux
Antal sensorer:	1
Optisk sensorstørrelse:	1/2.3 "
Antal effektive pixels (HxV):	3840 x 2160 pixel
Fast brændvidde:	2 mm
Nattesyn:	Ja
LED type:	IR
Billedhastighed:	15 fps
DC udgangsspænding:	12
Antal kameraer:	1
Synsfelt vinkel (FOV):	93 °
Monteringssæt:	Ja
Infrarød bølgelængde:	850 nm
Kameraets lukkerhastighed:	1/5 - 1/20000 sek./side
Signal/støjforhold:	39 dB
Linse, diameter:	4 mm
Antal linser:	1
Nattesyn, afstand:	27 m
Strømforbrug (Power over Ethernet (PoE)):	5.5 W