Lorex LW2100AC1 Manual

Lorex Overvågningskamera LW2100AC1

Læs gratis den danske manual til Lorex LW2100AC1 (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Lorex LW2100AC1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

FOR MORE INFORMATION:

www.lorextechnology.com

LW2100AC1 QSG_EN_R1 Page 1

CONTENTS:

Quick Start Guide

Digital Wireless Color

Camera with Antenna

Power Adaptor

for camera*

• Aim camera to best optimize the viewing

area: select a location that provides a clear view

of the area you want to monitor, which is free

from dust, and is not directly exposed to a strong

light source or direct sunlight.

• It’s always preferred to install the camera in a

sheltered location whenever possible.

• Avoid installing camera wherever there are thick

walls, obstructions, or interference

(i.e. transformers, microwave ovens or other

electrical equipment) between camera(s) and

receiver.

• Select a location for the camera that has an

ambient temperature between 14°F~122°F

(-10°C~50°C).

• Before starting permanent installation, have

another person hold the camera for you while

you verify its performance by observing the

image on a monitor.

INSTALLING THE CAMERA

Before you install the camera, carefully plan where and how it will

be positioned, and where you will route the cable that connects the

camera to the power adaptor.

INSTALLATION WARNINGS

1. Carefully unpack the camera.

2. Mount the stand to the wall:

• Mark the position of the

screw holes on the wall.

• Drill holes and insert the

drywall plugs as needed.

• Firmly attach the stand

to the wall using the

provided screws.

3. Attach the camera to the

mounting stand. Adjust

the angle of the camera

until the desired view

is set. Tighten the

thumbscrews to secure

the desired camera

position.

*May not be exactly as shown

NOTE: AVOID INSTALLING IN A

LOCATION WHICH REQUIRES

THE WIRELESS SIGNAL TO PASS

THROUGH CEMENT, CONCRETE

AND METAL STRUCTURES. THIS

WILL REDUCE THE

TRANSMISSION RANGE.

Mounting

Screws

COLOR DIGITAL WIRELESS INDOOR/OUTDOOR

ACCESSORY CAMERA

LW2100AC1 - QUICK START GUIDE

Camera Mounting

Stand

Thumbscrews

FOR MORE INFORMATION:

www.lorextechnology.com

LW2100AC1 QSG_EN_R1 Page 2

1. Connect the power cable from the camera to the power

adapter; plug the power adapter into an outlet or surge

protector.

2. Press the button on the receiver to select an CHANNEL

empty channel.

3. Press and hold the button for 5 seconds to CHANNEL

activate pairing function. The on-screen display informs

you that you have 30 seconds to press the PAIR button on

the camera*.

4. Press and hold the PAIR button underneath the antenna

on the back of the camera. You must press the PAIR

button on the camera within 30 seconds of pressing the

PAIR button on the receiver. If pairing is successful, live

video from the camera will immediately appear on the

monitor.

Attention: * The instructions contained in this Quick Start Guide are

for pairing with the LW2100 receiver. To add this accessory camera to

a different Lorex Digital Wireless Receiver, ﬁrst, check the”Wireless

Accessory Camera Compatibility Chart” available in the “Manuals and

FAQ’s” section of the LW2100 product page on www.lorextechnology.com

to ensure compatibility. Next, check manual for appropriate receiver for

detailed pairing instructions.

Connecting Camera Power Adapter

Connect one end of the camera power adapter to the camera and the other end to an electrical outlet.

It’s all on the Web

For detailed setup information, please

refer to your User’s Manual. For additional

information, please visit our website

www.lorextechnology.com/support

Pairing Button

Adding the Accessory Camera to your System

The pairing function assigns each camera to a different

channel on the receiver (connect up to 4 cameras to an

LW2100 receiver), and is necessary for conﬁguring

additional cameras. By default the camera that came

with the LW2100 system is assigned to channel no. 1 on

the receiver.

NOTE: It’s highly recommended to pair the accessory

camera to the receiver before permanently mounting the

camera. For detailed information, please check the

owners manual for the LW2100 system which is available

for download at www.lorextechnology.com

Connect power adaptor to

local 120V AC power outlet

COLOR DIGITAL WIRELESS INDOOR/OUTDOOR

ACCESSORY CAMERA

LW2100AC1 - QUICK START GUIDE

Produkt Specifikationer

Mærke:	Lorex
Kategori:	Overvågningskamera
Model:	LW2100AC1

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex LW2100AC1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Lorex Manualer

Lorex E842CDWP Manual

11 September 2025

Lorex LWB3801 Manual

13 August 2025

Lorex F861ASB-AA Manual

13 August 2025

Lorex U222AAW Manual

12 August 2025

Lorex LNZ44P12 Manual

11 August 2025

Lorex LNB9383 Manual

9 August 2025

Lorex C831CD Manual

9 August 2025

Lorex Vantage LZC7091 Manual

9 August 2025

Lorex C861XC-E Manual

9 August 2025

Lorex Live Ping LNC204 Manual

9 August 2025

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Intellinet 524421 Manual

13 September 2025

Intellinet INT-PSNC-UM-1106-07 Manual

13 September 2025

3xLOGIC VISIX Manual

13 September 2025

Intellinet NFC30 Manual

13 September 2025

3xLOGIC VX-4V-OD-RI Manual

12 September 2025

EZVIZ C7 Dual Manual

12 September 2025

3xLOGIC VX-SMBK-D Manual

12 September 2025

3xLOGIC VISIX V Manual

12 September 2025

3xLOGIC VX-2S-OP-30X Manual

12 September 2025

Geovision GV-VS2401 Manual

12 September 2025