Lorex LW2701AC1 Manual

Lorex Overvågningskamera LW2701AC1

Læs gratis den danske manual til Lorex LW2701AC1 (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Lorex LW2701AC1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

LW2701AC1 SERIES QSG_EN_R2 Page 1

www.lorextechnology.com

CONTENTS:

Quick Start Guide

Digital Wireless Color

Camera with Stand

Wireless Antenna

for camera

Power Adaptor

for camera*

• Mount the camera indoors or outdoors. For outdoor

installation, mount it in a sheltered place where it is not

directly exposed to rain or snow.

• Aim the Cameras to best optimize the viewing area:

Select a location for the camera that provides a clear

view of the area you want to monitor, which is free from

dust, and is not in line-of-sight to a strong light source

or direct sunlight.

• Avoid installing the cameras where there are thick

walls, obstructions, or interference (i.e. transformers,

microwave ovens or other electrical equipment)

between the Cameras and the Receiver.

• Select a location for the camera that has an ambient

temperature between 14°F~122°F (-10°C~50°C)

• Before starting permanent installation, have another

person hold the camera for you while you verify its

performance by observing the image on a monitor.

INSTALLING THE CAMERA

Before you install the camera, carefully plan where and how it will be

positioned, and where you will route the cable that connects the

camera to the power adaptor.

INSTALLATION WARNINGS

1. Carefully unpack the Camera.

2. Mount the stand to the wall:

• Mark the position of the

screw holes on the wall.

• Drill holes and insert the

drywall plugs as needed.

• Firmly attach the stand

to the wall using the

provided screws.

3. Attach the Antenna to the

Camera prior to mounting.

4. Place the camera in the

desired mounting position.

Tighten the thumbscrews

to secure the camera to the

Stand. Adjust the angle of

the camera until the

desired view is set.

*May not be exactly as shown

NOTE: AVOID INSTALLING IN A

LOCATION WHICH REQUIRES

THE WIRELESS SIGNAL TO PASS

THROUGH CEMENT, CONCRETE

AND METAL STRUCTURES. THIS

WILL REDUCE THE

TRANSMISSION RANGE.

Mounting

Hardware Kit

COLOR DIGITAL WIRELESS INDOOR/OUTDOOR

ACCESSORY MOTION CAMERA

LW2701AC1 SERIES - QUICK START GUIDE

CAMERA OVERVIEW

1. Passive IR motion sensor for more accurate PIR Sensor:

motion recording.

2. Built-in microphone underneath camera body.Microphone:

3. Camera lens.Lens:

4. Night vision IR LEDs used for viewing in Night Vision IR:

complete darkness.

5. Speaker for two-way audio.Speaker:

6. Pairing button. Pair:

7. Wireless antenna.Antenna:

8. Power Cable: Connect the included power adapter to the

cable extending from the camera.

LW2701AC1 SERIES QSG_EN_R2 Page 2

www.lorextechnology.com

CONNECTING CAMERA POWER ADAPTOR

Connect one end of the camera Power Adaptor to the camera and the other end to an electrical outlet.

It’s all on the Web

For detailed setup information,

please refer to your User’s Manual.

For additional information, please

visit our website

www.lorextechnology.com

1. Press on the wireless receiver or remote control.MENU

2. From the Main Menu, select and press the Pairing

Enter button.

3. Select Camera 3 Camera 4 or and press the Enter

button.

4. Following the on-screen prompt, press the Pair button

on the rear panel of the camera. You have 30 seconds

to press the PAIR button on the camera. Once paired,

the camera will be immediately displayed on-screen.

NOTE: If you do press the Pair button on the camera during

the 30 second pairing window, repeat steps 1~5 to try the

pairing process again.

Pairing Button

ADDING THE ACCESSORY CAMERA TO YOUR SYSTEM

The Pairing Function assigns each camera to a different

channel on the wireless receiver (connect up to 4

Cameras), and is necessary for conﬁguring additional

cameras. By default the cameras that came with the

LW2702 system are assigned to channel no. 1 and 2.

NOTE: It is highly recommended to pair the Accessory

Camera to the Receiver before permanently mounting the

camera. For detailed information, please check the

owners manual for the LW2702 system available at

www.lorextechnology.com

Connect power adaptor to

local 120V AC power outlet

COLOR DIGITAL WIRELESS INDOOR/OUTDOOR

ACCESSORY MOTION CAMERA

LW2701AC1 SERIES - QUICK START GUIDE

Produkt Specifikationer

Mærke:	Lorex
Kategori:	Overvågningskamera
Model:	LW2701AC1

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex LW2701AC1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Lorex Manualer

Lorex W261AS Manual

19 Juli 2025

Lorex F861AS-AA Manual

4 Juli 2025

Lorex W281AA Manual

3 Juli 2025

Lorex LND45DVW Manual

3 Juli 2025

Lorex E863SD Manual

2 Juli 2025

Lorex E863SB Manual

2 Juli 2025

Lorex LNB95MBW Manual

2 Juli 2025

Lorex LNW16XF Manual

26 Juni 2025

Lorex LNE95MDB Manual

20 Juni 2025

Lorex LNZ45P25 Manual

20 Juni 2025

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

FLIR ioi HD CB-5222 Manual

30 Juli 2025

Eufy Cam S3 Pro Manual

30 Juli 2025

Telycam Vision+ 4KN 30X Manual

30 Juli 2025

Marshall Electronics CV630-BI Manual

30 Juli 2025

Telycam Vision+ SE Manual

30 Juli 2025

FLIR Ariel CC-3405 Manual

29 Juli 2025

FLIR Ariel CM-3505 Manual

29 Juli 2025

Axis Q6355-LE Manual

29 Juli 2025

Sony SNC-EMX52R Manual

29 Juli 2025

Hikvision DS-2CD3086G2H-LIU Manual

29 Juli 2025