Lorex V261LCD-EG Manual

Lorex Overvågningskamera V261LCD-EG

Læs gratis den danske manual til Lorex V261LCD-EG (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Lorex V261LCD-EG, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
V261LCD-EG_QSG_EN_R1
1080p Wired Floodlight
To prepare for installation:
Before assembly, there are important preparations to make.
Leveled to the ground
• TURN OFF POWER TO YOUR
FLOODLIGHT CIRCUIT AT THE
FUSEBOX TO ENSURE NO
POWER IS BEING SENT. If you
controls the circuit, then turn
off the main power switch.
If you do not know where
your breaker is or how to turn
off power, consult a licensed
electrician.
• Verify that the supply voltage
is correct. Connect xture to a
100 VAC~240 VAC 50/60 Hz
power source.
• DO NOT connect oodlight to a
dimmer switch or timer.
• If you are not replacing a light
xture, you will need to run
power cabling to the install
location, and purchase a
UL listed junction box for a
licensed electrician to install.
LED Indicator
Quick Start Guide
V261LCD-EG
lorex.com
1080p Wired Floodlight
Package Contents
STEP 1: Preparation
Need Help?
Visit us online for up-to-date software
and complete instruction manuals
Click on the tabDownloads
4
Visit lorex.com
Search for the model
number of your product
Click on your product
in the search results
3
2
1
Copyright © 2022 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right to
modify product design, specications and prices, without notice and without incurring
any obligation. E&OE. All rights reserved.
Mounting Screws,
Anchors & Silicone Gaskets
(×3)
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use and handling of the product.
• Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh,
chemical-based cleaners.
• Use the product within given temperature, humidity and voltage levels noted in the
product’s specications.
• Do not disassemble the floodlight.
Safety Precautions
• Always follow code standards when installing wired connections.
• This floodlight camera must be installed on a wall and a UL listed junction box.
• This floodlight includes an Auto Mechanical IR Cut Filter. When the camera
changes between Day/Night viewing modes, an audible clicking noise may be
heard from the floodlight. This clicking is normal, and indicates that the camera
lter is working.
• Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation
assumes no liability for use of its products that does not conform with local laws.
Disclaimers
CAUTION
Risk of re.
Do not install camera near flammable or combustible surfaces.
Risk of electrical shock.
Disconnect the power at the fuse box before installation.
Hooks
Mounting Bracket
11.4”
290mm
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
FCC Notice
Product Overview
PIR motion sensor
Speaker
Microphone
Camera
IR LED
Top cover
Light sensor
Memory slot*
Reset button
Floodlights
Adjusting knobs
Phillips Machine Screw
10 Feet
32 Feet
12.8” / 325mm
7.3” / 185mm
Mount the floodlight camera 10 feet (3 meters) high with the
motion detector levelled to the ground for optimal detection of
human-sized objects as far as 32 feet (10 meters).
Recommendation:
Front Panel
Back Panel
Behavior Meaning
(steady) Operating correctly.
(flashing) Ready for connection.
(flashing rapidly) Mobile device is attempting to connect to the camera.
(steady)
Device malfunction. Press and hold the reset button until you hear a chime, and then repeat the setup.
(flashing) Network connection failed. Press and hold the reset button until you hear a chime, and then repeat the setup.
(flashing rapidly)
Memory slot error. Try removing and re-inserting the included memory slot card, or try a different card.
(alternating) Firmware upgrade in progress.
* To access the memory slot and reset
button, twist left to open the top cover.
Philips machine screw

Produkt Specifikationer

Mærke: Lorex
Kategori: Overvågningskamera
Model: V261LCD-EG

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex V261LCD-EG stil et spørgsmål nedenfor, og andre brugere vil svare dig


Overvågningskamera Lorex Manualer

Lorex

Lorex N92062-M2D6 Manual

15 Oktober 2025
Lorex

Lorex E842CDWP Manual

11 September 2025
Lorex

Lorex LWB3801 Manual

13 August 2025
Lorex

Lorex F861ASB-AA Manual

13 August 2025
Lorex

Lorex U222AAW Manual

12 August 2025
Lorex

Lorex LNZ44P12 Manual

11 August 2025
Lorex

Lorex LNB9383 Manual

9 August 2025
Lorex

Lorex C831CD Manual

9 August 2025
Lorex

Lorex Vantage LZC7091 Manual

9 August 2025
Lorex

Lorex C861XC-E Manual

9 August 2025

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Dahua Technology

Dahua Technology IPC-HDW5849H-ASE-LED Manual

1 November 2025
Dahua Technology

Dahua Technology HAC-HDW2249T-A Manual

1 November 2025
Dahua Technology

Dahua Technology HAC-HFW1230TH-I4 Manual

1 November 2025
Dahua Technology

Dahua Technology A21CC0Z Manual

1 November 2025
EverFocus

EverFocus EZN3850-NV Manual

1 November 2025
Abus

Abus IPCA64512A Manual

1 November 2025
Dahua Technology

Dahua Technology HAC-PFW3601-A180-AC24 Manual

1 November 2025
Dahua Technology

Dahua Technology IPC-HUM4431S-L4 Manual

1 November 2025
Dahua Technology

Dahua Technology IPC-HDBW5241R-ASE Manual

1 November 2025
Dahua Technology

Dahua Technology HAC-HDW1200L Manual

1 November 2025