Lorex W261AS Manual

Lorex Overvågningskamera W261AS

Læs gratis den danske manual til Lorex W261AS (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Lorex W261AS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

HD Wi-Fi Camera

Quick Start Guide

lorex.com

Camera

ATTENTION:

A REGULATED UL / CSA APPROVED power supply is REQUIRED for use

with this camera (included). Use of a non-regulated, non-conforming power

supply can damage this product and voids the warranty.

Power Accessories Mounting Kit

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use and handling of the product.

• Use the camera within given temperature, humidity and voltage levels

noted in the camera’s specications.

• Do not disassemble the camera.

• Do not point the camera directly at the sun or a source of intense light.

• Periodic cleaning may be required. Use a damp cloth only. Do not use any

harsh, chemical-based cleaners.

W261AS_QSG_EN_R2

Problem Solution

Cannot set up

camera

• Ensure your mobile device is within 1ft (30cm)

of the camera during setup.

No picture / signal • Ensure the LED indicator on the camera is

glowing steady green. See ‘LED Behavior’

section for details if otherwise.

• Ensure the camera is properly connected to

power using the included USB power adapter.

• Try repositioning the camera, router, or both to

improve signal strength.

Picture is not clear • Check the camera lens for dirt, dust, and

spiderwebs. Clean the lens with a soft, clean

cloth.

• Remove the vinyl cover on the camera lens.

No audio • Ensure audio function on camera is turned on.

• Ensure audio is turned up on viewing device.

Person detection is

not working

• Ensure you have enabled Person Detection in

the Device Settings screen of the Lorex Home

app. See ‘Overview of Lorex Home app’ for

details.

×3 ×3

×1

• The camera is rated for indoor use

only. Do not mount the camera

outdoors.

• Do not place the magnetic mounting

plate on or near other electrical

devices.

• This camera includes an Auto

Mechanical IR Cut Filter. When the

camera changes between Day/Night

viewing modes, an audible clicking

noise may be heard from the camera.

This clicking is normal, and indicates

that the camera lter is working.

• Audio recording without consent is

illegal in certain jurisdictions. Lorex

Corporation assumes no liability for

use of its products that does not

conform with local laws.

W261AS Series

Status LED

Microphone

microSD slot: microSD card

pre-inserted (expandable up

to 256GB, microSD class 10

or higher).

Speaker

Reset button: Press and hold

until the chime sounds to

reset the camera.

Power: Connect the included

USB power adapter.

Camera Overview

Package Contents

Need Help?

Visit us online for up-to-date software

and complete instruction manuals

Click on the tabDownloads

Visit lorex.com

Search for the model

number of your product

Click on your product

in the search results

As our products are subject to continuous improvement, Lorex reserves the right to

modify product design, specications and prices, without notice and without incurring

Safety Precautions

LED Behavior

Troubleshooting

See table below for denitions of camera’s LED behaviors:

Behavior Meaning

(steady)

Operating correctly.

(ashing)

Ready for connection.

(ashing rapidly)

Mobile device is attempting to connect to the camera.

(steady)

Device malfunction. Try resetting the camera (see

‘Camera Overview’ for details) and repeating the

setup.

(ashing)

Network connection failed. Try resetting the camera

(see ‘Camera Overview’ for details) and repeating the

setup.

(ashing rapidly)

microSD error. Try removing and re-inserting the

included microSD card, or try a different card.

(alternating)

Firmware upgrade in progress.

Dimensions Disclaimers

2.7” / 68mm

4.3”

109mm

×1

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE

FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT

MAY CAUSE UNDESIRED OPERATION.

FCC Notice

Connect to the camera using the free Lorex Home app on your iPhone® or

Android™ phone.

1. Connect the camera cable to the included USB adapter and plug into a

nearby outlet.

2. Download and install the free app from Lorex Home

the App Store or Google Play Store.

3. Tap the Lorex Home icon to launch the app. Tap Sign

up, then follow the on screen prompts to create an

account. Record your account details below:

W261AS_QSG_EN_R2

STEP 1: Connecting to Lorex Home

To connect your camera to Lorex Home:

Back to

screen

Device

settings

Device name

Pause / Play FullscreenViewing

modes

Mute /

Unmute

Streaming

quality*

Play back

recorded

video

Snapshot

Manual

recording

2-way audio: tap to speak, tap again to disable

STEP 2B: Wall/Ceiling Mounting (Optional)

The camera is ready at this point to be placed on any surface and begin

monitoring if you would like to keep the placement of your camera exible.

You also have the option to mount the camera to an indoor wall or ceiling

using the included mounting accessories. Use the included double-sided

tape to mount the camera with no drilling required, or follow the steps

below for permanent mounting.

To mount the camera:

1. Mark the camera’s mounting

position using the included

mounting template.

2. Drill holes where marked on

the mounting template.

NOTE: Insert the optional

plastic mounting anchors if

needed.

Plastic

anchors

Mounting

surface

Mounting

screws

Magnetic

mounting plate

4. Once the status LED on the camera is ashing green and the startup

chime sounds, tap .+

5. Scan the QR code on the back of the camera using your mobile device’s

camera.

NOTE: If your mobile device cannot scan the QR code, tap Manually

enter Device ID.

6. Create a secure password for the camera. Record your camera

password below:

Email:

Account Password:

Overview of Lorex Home App

Overview of the live viewing screen and controls in the Lorex

Home app. For complete instructions on using the app, see the

Lorex Home app manual on your product page at lorex.com.

Camera Password:

7. Select your Wi-Fi network from the list, then enter the password to

connect your camera to the Internet.

8. Once the status LED on the camera is solid green, tap to add the Next

camera to your Lorex Home account.

9. Set a name for the camera and congure date & time preferences,

then tap Complete to nish the setup.

• Place the camera as close to your Wi-Fi router or access point as

possible.

• Reduce the number of obstructive materials between the camera and

the router or access point. Concrete, brick, metal and wood are the most

common materials in your house that can cause poor signal strength.

To ensure the best possible wireless performance, it is recommended to

keep the following installation tips in mind when choosing a location for

the camera:

• Other electronic devices such as microwaves, TVs, cordless phones,

and baby monitors can cause signal interference. It is recommended to

install the camera as far away from these devices as possible.

STEP 2A: Installation Tips

* Change the streaming quality to SD (Standard Denition) to conserve

bandwidth while watching live video. This will not impact the quality of

recorded video.

the Device Settings screen of the Lorex Home app to ip the camera

image (see ‘Overview of Lorex Home App’ for details).

3. Position the holes in the

magnetic mounting plate over the

mounting points.

4. Attach the magnetic mounting plate to

the mounting surface using the included

mounting screws.

5. Place the camera base on the magnetic

mounting plate to secure it to the mounting

surface. Adjust the camera’s position as

needed.

NOTE: If you are installing the camera on a

ceiling, use the feature on Image Rotation

Produkt Specifikationer

Mærke:	Lorex
Kategori:	Overvågningskamera
Model:	W261AS

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorex W261AS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Lorex Manualer

Lorex E842CDWP Manual

11 September 2025

Lorex LWB3801 Manual

13 August 2025

Lorex F861ASB-AA Manual

13 August 2025

Lorex U222AAW Manual

12 August 2025

Lorex LNZ44P12 Manual

11 August 2025

Lorex LNB9383 Manual

9 August 2025

Lorex C831CD Manual

9 August 2025

Lorex Vantage LZC7091 Manual

9 August 2025

Lorex C861XC-E Manual

9 August 2025

Lorex Live Ping LNC204 Manual

9 August 2025

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Intellinet 524421 Manual

13 September 2025

Intellinet INT-PSNC-UM-1106-07 Manual

13 September 2025

3xLOGIC VISIX Manual

13 September 2025

Intellinet NFC30 Manual

13 September 2025

3xLOGIC VX-4V-OD-RI Manual

12 September 2025

EZVIZ C7 Dual Manual

12 September 2025

3xLOGIC VX-SMBK-D Manual

12 September 2025

3xLOGIC VISIX V Manual

12 September 2025

3xLOGIC VX-2S-OP-30X Manual

12 September 2025

Geovision GV-VS2401 Manual

12 September 2025