Lorus V071 Manual

Lorus Ur V071

Læs nedenfor 📖 manual på dansk for Lorus V071 (2 sider) i kategorien Ur. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
C H A R A C T E R I S T I C S
1. Analogue time display: Hour, minute and
second hands.
2. Digital time display: Hour, minut e and
seconds.
3. Calendar display: Month, date and day
of the week.
Automatic calendar: Calendar adjusts
automatically for odd and even months
except February of leap years.
4. Time indication: Changeover between 12-
and 24-hour indications is possible.
5. Alarm: The alarm rings at the designated
time for 20 seconds.
6. Hourly time signal: Can be set to ring every
hour on the hour with a single beep.
7. Stopwatch: Measures up to 59 minutes and
59 seconds 99 in 1/100 second increments.
Split time measurement
8. Illuminating light: The light illuminates the
display for easy viewing in the dark.
4. Press button A to set the flashing digits.
One digit is advanced with each press of
button A. The flashing digits except the
seconds and 12-/24-hour indication move
quickly by keeping button A pressed.
5. After all the adjustments are completed,
press button “B to return to the TIME mode.
Seconds setting
Press button “A” in accordance with a time
signal. The seconds are reset to 00 and
start immediately.
When the seconds count any number from
30 to59” and button “Ais pressed, one
minut e is added and t he seconds are
immediately reset to 00.
No t e s:
1. When setting the hour digits, check that
AM/PM is properly set. Only PM mark is
displayed. For the AM setting, there is no
indication.
2. When the time function is displayed in the
24-hour indication, the alarm will also be
displayed in the 24-hour indication.
3. If the watch is left untouched in the TIME
SETTING display with the digits flashing, it
will automatically return to the TIME mode
in 1 to 2 minutes.
HOW TO SET THE ANALOGUE T I ME
Before setting the analogue time, be sure
to set the digital time.
(Refer to “HOW TO SET THE DIGITAL TIME”.)
1. Pull out the crown when the second hand
is at the 12 oclock position. The second
hand will stop on the spot.
2. Turn the crown to set the hour and minute
hands to the desired time.
* When setting the minute hand, advance
it 4 to 5 minutes ahead of the time and
then turn it back to the exact minute.
3. Push the crown back in to the normal
position when the second digits count “00
in the digital time display.
1. Press button “B to show the ALARM mode.
2. Press button C t o show t he ALARM
SET T ING display. T he hour digit s st art
flashing.
3. Select ion of the digits to be adjusted
(flashing) is made in the following order by
pressing button C.
M in ut e s
Hour AL ARM mod e
4. Press button A to set the flashing digits.
One digit is advanced with each press of
button “A”. The flashing digits move quickly
by keeping button A pressed.
5. After all the adjustments are completed,
press button B to return to the ALARM
mode.
1. Press button B to show the TIME mode.
2. Press button “C” for 2 to 3 seconds to show
the TIME SETTING display. The second digits
start flashing.
3. Select ion of the digits to be adjusted
(flashing) is made in the following order by
pressing button C.
NREV071C 8-2011
CAL. V071 (RVR SERIES)
CAL. V072 (RBK SERIES)
Hou r h and
No r mal
p os i t i o n
E xt en de d
p os i t i o n
Cro w n
Second h and
ALARM C HRONO GRAPH
PM
Minu t e h and
CAL ENDAR mod e
ALARM mo d e
ST O P WAT C H m o de
B
B
B
B
T IM E m ode
The select ion of the mode is made in the
following order with each press of button “B.
4. Press button A to set the flashing digits.
One digit is advanced with each press of
button “A. They move quickly by keeping
button A pressed.
5. After all the adjustments are completed,
press button “B” to return to the CALENDAR
mode.
* If the watch is left untouched in t he
CALENDAR SETTING display with the digits
flashing, it will automatically return to the
CALENDAR mode in 1 to 2 minutes.
Pr es s f or 2 to 3
s e c ond s .
( )
D at e M on t h Day
CAL ENDAR mod e
PM
HOW T O S ET T H E C A L EN D AR
A
Day of t he week
C
B
M ont h Da t e
1. Press button B to show the CALENDAR
mode.
2. Press button “C” for 2 to 3 seconds to show
the CALENDAR SETTING display. The date
digits start flashing.
3. Select ion of the digits to be adjusted
(flashing) is made in the following order by
pressing button C.
HOW T O SET T HE D I G I TA L T I ME
Hou r
M inu t es Seco nd s
PM
C
BA
P M ma r k i s d i s p l a y ed i n t h e
12 -h ou r indic at i on.
AM mar k is not dis pla yed .
Seconds
( )
HOW TO SET T H E A L A R M
PM
C
BA
Hou r
M inu t es
Al ar m m ar k
PM m a r k i s dis pl a y ed i n t h e
12 -h ou r indic at i on.
AM mar k is not dis pla yed .
Ho u r ly t i m e
s ignal m ar k
ALARM C HRON OGRAP H
PM
Hou r h and Minu t e h and
No r mal
p os i t i o n
C r ow n
Second
hand
Hou r M i nu t es
Seco nd s
P M mar k is d is pl ayed in t h e
12 -h ou r indic at i on.
AM mar k is not dis pla yed .
E xt en de d
p os i t i o n
C
BA
D I S P L AY A N D C R O W N / BUTTONS
M in ut e s Hour
1 2 - o r 24 - h o u r
i nd i ca t io n
T IM E m ode
Pr es s f or 2 to 3
s e c ond s .
P
M
PM
PM
PM


Produkt Specifikationer

Mærke: Lorus
Kategori: Ur
Model: V071

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorus V071 stil et spørgsmål nedenfor, og andre brugere vil svare dig