Lorus Y737 Manual

Lorus Ur Y737

Læs gratis den danske manual til Lorus Y737 (4 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Lorus Y737, eller vil du spørge andre brugere om produktet?

Side 1/4
CHARACTE R I S T ICS
1 . T i m e a n d c a l e n d a r :
Hour, minutes, seconds, year, month, date
and day of the week.
Fully automatic calendar: The calendar
adjusts automatically for odd and even
months including February of leap years.
Tim e in d ic at ion : Changeover between
12- and 24-hour indications is possible.
2. S to p wa t c h : Measures up to 99 hours, 59
minutes and 59 seconds in 1 100 second
in crements for the first hour and in 1-
second increments thereafter.
S p l i t t i m e m e a s u r e m e n t
3 . Co u n t d ow n t i m e r : Up to 99 hours and
59 minutes can be set in minute increments.
After the set time is up, the timer counts
up the time up to 59 minutes and 59 seconds.
The set time can be used repeatedly unless
canceled.
4 . D a i l y a l a r m : The alarm can be set to
ring on a 24-hour basis.
H ou rl y t im e s ig n a l: Can be set to ring
every hour on the hour with a single beep.
5 . Du a l t im e : The time of a different time
zone can be displayed.
6. Il l umina ting lig ht: The light illuminates
the display for easy viewing in the dark.
BU T T O NS AND D I S P L AY S
I MNSTRUCTION ANUAL
CAL. Y717 (RYZ SERIES)
CAL. Y718 (RCP SERIES)
CAL. Y719 (RE2 SERIES) CAL. Y737 (RZM SERIES)
NREY737C 05-00
*The design of the liquid crystal panel differs
depending on the calibre. The functions
and method of operation, however, are the
same for all the four calibres.
Day
PM
mark
SecondsHour Minutes
C
D
B
A
Date
AD
Day Date
B C
Hour Minutes
Seconds
PM
mark
With each press of button A, the selection of
the mode can be made in the following order:
STOPWATCH
m o d e
T IM E /C A L EN D A R
m o d e
A
AA
T I M E R
m o d e
D U A L T I M E
m o d e
A
A
A L A R M m od e
TIME /CAL E N DAR MODE
DateDay
C
D
B
A
Minutes SecondsHour
1. Press button “Ato show the TIME/CALENDAR
mode.
2. Pr ess button A for 2 to 3 sec on d s to
show the time/calendar setting display.
The second digits start flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button C.
Seconds
Minutes
Hour
Year
Month
Date
12- or 24-hour indication
4. Press button D to set the flashing digits.
One digit is advanced with each press of
the button. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button D pressed.
S e c o n d s s e t t i n g
Press button D in accordance with a
time signal. The seconds are reset to
00 and start immediately.
When the seconds count any number
from30 to59 and button D is pressed,
one minute is added and the seconds
are reset to 00.
5. After all the adjustments are completed,
press button A to return to the TIME/
CALENDAR mode.
N o t e s :
1. When setting the hour digits in the 12-
hour indication, check that AM/PM is set
properly. Only PM mark is displayed.
For the AM setting, there is no indication.
In the 24-hour indication, 24 is displayed.
2. Once the year, month and date have been
set, the day of the week is set automatically.
3. If the watch is left untouched in the time/
ca lendar setting display w ith the digits
flashing, it will automatic a lly retu r n to
the TIME/CALENDAR mode in 2 to 3 minutes.
Sh ow in g th e ca l e n d ar d i sp l ay
Press and hold button C in the TIME/
CALENDAR mode. While the button is
kept pressed, the year, month and date are
displayed.
C
Year
Date
Month
Sto p wa tch o p e ra tio n
STOP WATCH M OD E
The stopwatch can measure up to 99 hours,
59 minutes and 59 seconds.
It measures in 1100 second increments for
the first hour and in 1-second increments
thereafter.
Press button A to show the STOPWATCH
mode. Chrono is displayed first, and then
the STOPWATCH mode appears.
PM mark
C
D
B
A
Standard measurement
C
S t a r t
C
S t o p
D
R e s e t
Accumulated elapsed time measurement
** Restart and stop of the stopwatch can be
repeated by pressing button C.
C
S t a r t
C
S t o p
C
R e s t a r t
** C
S t o p
D
R e s e t
S p l i t t i m e m e a s u r e m e n t
C
D
B
A
Split time
Accumulated
elapsed time
C
S t a r t
D
S p l i t 1
D
S p l i t 2
** C
S t o p
D
R e s e t
** Split time can be measured repeatedly by
pressing button D.
TIMER M ODE
Up to 99 hours and 59 minutes can be set in
minute increments.
After the set time is up, the timer counts
up the time up to 59 minutes and 59 seconds.
The set time can be used repeatedly unless
canceled.
Press button A to show the TIMER mode.
TIMER is displayed first, and then the TIMER
mode appears.
C
D
B
A
Current
time
Ti me r s e t tin g
1. Pr ess buttonA for 2 to 3 sec on d s to
show the timer setting display. The hour
digits start flashing.
2. Press button C to select the digits to be
adjusted (flashing).
Minutes
Hour
3. Press button D to set the flashing digits.
One digit is advanced with each press of
the button. Digits move quickly by keeping
button D pressed.
4.
After all the adjustments are completed, press
button A to return to the TIMER mode
.
* If the watch is left untouched in the timer
setting display with the digits flashing,
it will automatically return to the TIMER
mode in 2 to 3 minutes.
Set time
C
S t a r t
C
S t o p
C
R e s t a r t
Time-up
* Warning
sound
beeps.
**
C
S t o p
** Restart and stop of the timer
can be repeated by pressing button
C.
* When the set time is up, a warning
sound beeps for 20 seconds. To
stop it manually, press any of
the buttons.
Ti me r o p e ra t io n
Press the buttons in the following order.
D
R e s e t
N o t e s :
1. Afte r th e se t time is up, th e
timer counts up the time up to
59 minutes and 59 seconds.
2. Once the timer is set, the set
time is retained and can be used
repeatedly unless it is readjusted.


Produkt Specifikationer

Mærke: Lorus
Kategori: Ur
Model: Y737

Har du brug for hjælp?

Hvis du har brug for hjælp til Lorus Y737 stil et spørgsmål nedenfor, og andre brugere vil svare dig