LYYT LT12560-CCT Manual

LYYT Ikke kategoriseret LT12560-CCT

Læs gratis den danske manual til LYYT LT12560-CCT (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om LYYT LT12560-CCT, eller vil du spørge andre brugere om produktet?

Side 1/2
RGBW LED TAPE
Installation Guide
Stock code
Voltage
Power consumption
LEDs / metre
Luminous flux (Lumens per metre)
156.7 19UK
12Vdc
9.6W/m
60
600lm/m
Common Specifications
Beam angle
LED type
Light intensity per LED (millicandelas)
Reel length
IP rang
Cross-secon
Weight
Recommended RGBW Controller
156. 7 73 UK
In-line RF 2-colour LED Tape Controller
WW/CW LED Tape Installation Guide
Caution: Please read this guide carefully installing before Lyyt LED tape
Damage by incorrect pplication not covere by the warranty caused a is d
Lyyt WW/CW LED supplied on 5m and variable white correlated colour (CCT) bytape is reels offers temperatures
blending warm cool white and colours on each LED chip.
Installation be competent should carried out by electrical installers, observing the electrical safety relevant procedures.
Lyyt WW/CW LED tape has a self-adhesive easily clean, non-porous surface.backing to it to be allow attached to a
Where ss than 5m f ape is needed, there re r points as shown low, where he ape ay t size These le o t a solde be t t m be cu to .
cut nt are t cm intervals as shown low. In order to re-connect o another ngth f ape fter cutting, strip away poi s a 5 be t le o t a
the poxy coating at he solder points an solder a ire rom V+ WW and CW to like t on he ext length apee t d w f , poin s t n of t .
Some ccessories are pplied with he ape el for this purpose. In r to retain eather-proofin it is advised to a su t t re orde w g,
seal the ts and oints with one lue. cu j silic g
Each 5m reel of WW/CW LED tape is fitted with a 4-pin connector for power input from an 2-colour controller.
Ensure that the WW, V+, CW and pins are connected the correct way round. V+
It is imperative that the power supply and controller should have higher than the rated capacity in Amps (A) for the
current required to power the length(s) of LED tape installed. Please see the table below for reference.
Tape length
5m
10m
15m
20m
25m
30m
35m
40m
WW/C tape 60 LED/m W 12V
4A
8A
12A
16A
20A
24A
28A
32A
Please to select our range 12Vdc power supplies and 2-colour controllers that visit www.avsl.com from of are suitable for
powering WW/CW LED Lyyt tape.
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright . Group Ltd. © 2017AVSL


Produkt Specifikationer

Mærke: LYYT
Kategori: Ikke kategoriseret
Model: LT12560-CCT

Har du brug for hjælp?

Hvis du har brug for hjælp til LYYT LT12560-CCT stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret LYYT Manualer

LYYT

LYYT CLIP10-B Manual

29 August 2024
LYYT

LYYT DIY-CW60 Manual

20 August 2024
LYYT

LYYT PS30-24 Manual

17 August 2024
LYYT

LYYT LT24560-BL Manual

16 August 2024
LYYT

LYYT DIY-B60 Manual

15 August 2024
LYYT

LYYT DIYH-RGB30 Manual

14 August 2024
LYYT

LYYT LT12560-WW Manual

14 August 2024
LYYT

LYYT PS40 Manual

14 August 2024
LYYT

LYYT RGB10-F Manual

14 August 2024
LYYT

LYYT LT12560-CW Manual

14 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer