Mach Power SW-UF16P2G2SV-061 Manual

Mach Power Ikke kategoriseret SW-UF16P2G2SV-061

Læs gratis den danske manual til Mach Power SW-UF16P2G2SV-061 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Mach Power SW-UF16P2G2SV-061, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Features
Comply with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3az, af/at standards
Support IEEE802.3x full-duplex flow control; support Auto MDI/MDIX
16 Ports support 48V-56VDC power to PoE powered devices
Provide 15.4W or 30W power to powered devices
2 Combo Uplink port: 10/100/1000Mbps RJ-45 or 1000Base-x optical fiber port SFP
265 watts PoE budget
PoE data & power transmission distance up to 100meters
Excellent anti-thunder, anti-static and anti-interference ability
Support 10K lenght Jumbo frame transmission
Restart function helps master IC reset whoolly
Built-in 265W power supply
Easy and convenient to use, plug & play, no need to configure
Galvanized housing for stable and durable working life
Overview
The SW-UF16P2G2SV-061 provides 16 ports 10/100Mbps IEEE 802.3af/at Power over
Ethernet with a total of 265 watts of PoE budget, which is an ideal solution to fulfill the
demand of sufficient PoE power for network applications.
The SW-UF16P2G2SV-061 is an ideal solution for securing IP surveillance infrastructure.
It provides both 802.3af/at PoE functions along with 16x10/100Base-TX ports featuring
15.4 watt 802.3af/30 watt 802.3at PoE in RJ-45 interface and extra 2-Combo uplink port:
10/100/1000Mbps RJ-45 or 1000Base-TX optical fiber port SFP port to keep a cascade
connection with another switch or NVR. For instance, one SW-UF16P2G2SV-061 ca be
combined with one 16 Channel NVR and 16 PoE IP camerras as a kit for the administra-
tor to centrally and efficiently manage the surveillance system in the local LAN and the
remote site via internet.
With data and power over Ethernet from one unit, the SW-UF16P2G2SV-061 reduce
cabling requirements and eliminates the need for dedicated electrical outlets on the wall,
ceiling or any unreachable place. A wire that carries both data and power can lower the
installation costs, simplify the installation effortand eliminate the need for electricians or
extension cords. Providing 16 interface, the SW-UF16P2G2SV-061 is ideal for small
business and workgroups requiring deploying the PoE for the wireless access point,
IP-based surveillance IP phone in any places easily, efficiently and cost-effectively.
Front panel
1. Rack-mounting ears: Cabinets for product installation or Wall installation
2. Power Indicator: Red Light on: with power; Light off: no power
3. PoE Indicator: Yellow Light on: when device is powered
Light off: when device is not detected or not powered
4. Link/ Act Indicator: Green LED on: link up off: link down blinks: data transfer
5. Reset Button: Whole machine will restart while press button
6. Uplink SFP port: Speed 1000Base-X, transfer data from PoE ports to other devices
(NVR/Switch /ADSL)
7. Uplink Gigabit RJ45 port: Transfer data from PoE ports to other devices (NVR/Switch
/ADSL)
7. Downlink port: Transfer data from other IP devices to the switch
Rear panel
1. Input: AC 96 264V~
2. Power Switch: Turn on with power, Turn off no power
3. Waiting Content
5. Ground Connection
6. Fuse: Max 10A
visit our website
www.machpower.it
USER MANUAL SW-UF16P2G2SV-061
What is a Combo Port on an Ethernet Switch
A Gigabit Ethernet Combo port is an Ethernet port and a Mini-GBIC port (also called
SFP's) that share the same switch fabric and port number. A Combo port is a way to
provide different types of connectivity without taking up unused switch fabric. These
Combo ports can also be labeled as tied, meaning two different physical ports that can
only be used one at a time. A Gigabit Ethernet Combo port consists of one1000Base-T
Gigabit over Copper port (provided), and one Mini-GBIC (empty port that requires
Mini-GBIC module).
Note: If a Mini-GBIC port is being used, than the corresponding 1000Base-T copper
port is automatically disable and vice versa.
Technical Specification
What is SFP
(Small Form-factor pluggable). A small transceiver that plugs into the SFP port of a
network switch and connector to Fibre Channel and Gigabit Ethernet (GbE) optical fiber
cables at the other end. Superseding the GBIC transceiver, SFP modules are also called
“mini-GBIC” due their smaller size. By choosing the appropriate SFP module, the same
electrical port on the switch can connect to fibers of different type (multi mode singlemo-
de) and different wavelenghts. If the fiber is upgraded, the SFP module is replaced.
The SFP converts the serial electrical signals to serial signal and vice versa. SFP
modules are hot swappable and contain ID and system information for the switch.
How to make a network cable
To create a network cable, you will first need the equipment listed below.
1. Cat5e, Cat6, or Cat7 cable
2. RJ-45 connectors
3. Crimping tool
4. Wire stripper or knife
1. We recommend stripping at least a half of an inch offf the cable to expose the inner
wires.
2. Separate the wires within the cable after the network cable jacket has been removed
so that they can be put into the RJ-45 connector
3. The CAT5 twisted-pair cable consist of four twisted wires, each color coded; 8 wires
must be correctly lined as the standards of EIA/TIA 568A or EIA/TIA568B
4. Cut thread residue and leave 1.5cm wire exposed outside the insulating layer and
ensure 8 wire are straighten and neat.
5. Place the cable into the RJ-45 connector and use the crimping tool to attach the
connector.
6. Repeat above steps for the other end of the cable; the wire sequence of both ends of
the cable is suggested to be identical.
7. Make sure to test the cables before installing them once both ends of the cable have
been completed.
Note:
1. All RJ-45 Ports of this device support Auto MDI/MDIX, so the different wire
sequence of both enads of the cable is allowed.
2. Up to three units can be cascaded for 16 ports PoE switch
T568A
T568B
1
white
greeen
white
orange
2
greeen
orange
3
white
orange
white
green
4
blue
blue
5
white
blue
white
blue
6
orange
green
7
white
brown
white
brown
8
brown
brown
The wire sequence of RJ45 connector must
comply with internaonal standard of EIA/TIA
568A or EIA/TIA 568B.
MODEL
Product name
Power Supply
Network port
parameter
Network switch
specification
Indicator
SW-UF16P2G2SV-061
16 ports 10/100Mbps IEEE 802.3af/at PoE switch
Power Supply mode
Voltage range
Power consumption
Network Port
Transmission distance
Transmission medium
PoE standard
PoE power supply mode
PoE power supply wattage
Network standards
Swap mode
Data-caching mechanism
MAC address list
Throughput
Power indicator
Uplink Combo port
PoE indicator
Built-in power supply
AC 96~264V
The device 10W <
PoE power supply 265W≤
Ethernet downlink port : 10/100Mbps
2 combo uplink port: 10/100/1000Mbps RJ45
or 100Base-X optical fiber port SFP
Downlink & Uplink port: 100m
The trasmission distance of optical fiber port
depends on the different SFP modules
Downlink port: Cat5e/6 standard cable
Uplink port: Cat5e/6 standard cable
IEEE802.3 af/at standard
End-span method
Each port ≤30W
Whole device ≤265W
IEEE802.3, IEEE802.3ab, IEEE802.3ad
IEEE802.3u, IEEE802.3az
IEEE802.3z
Store and forward
4.1M
8K
5.3568Mbps
Red led on: power on
Green led on: link up
Green led off: link down
Green led blinks: data transfer
16 PoE indicator (yellow)
Indicator
Button
Protection level
Reliability
Mechanical
Environmental
PoE network port indicator
Reset button
Surge protection
Electrostatic protection
Mean time btw failures
Dimension (mm)
Housing
Body color
Net weight
Operating temperature
Storage temperature
Relative Humidity
16 port indicators blink white data transfer
Press the reset button and the device restarts
6KV (common mode), 10/700us IEC61000-4-5
2KV (differential mode), 10/700us IEC61000-4-5
Contact Discharge: ±6KV
Air Discharge: ±8KV
Standard:IEC61000-4-2
>50.000h
440L x 297W x 44H
Galvanized
Black
4.25kg
0°C 55°C~
-40°C 85°C~
0~ 95% (non-condensing)
Quick Setup Guide
Step1: Begin with all input/output devices turned off with power cables removed
Step2: Connect RJ-45 port of PoE cameras with Downlink RJ-45 port of PoE
switches in standard Cat 5e/6 cables
Step3: Connect with Uplink RJ-45 port of PoE switches with RJ-45 port of NVR
or computer or other devices in standard Cat 5e/6 cables
Step4: Input AC power cord into power socket of PoE switch
Step5: Make sure above connection is properly finished, then turn on power

Produkt Specifikationer

Mærke: Mach Power
Kategori: Ikke kategoriseret
Model: SW-UF16P2G2SV-061

Har du brug for hjælp?

Hvis du har brug for hjælp til Mach Power SW-UF16P2G2SV-061 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Mach Power Manualer

Mach Power

Mach Power NW-PSSO-004 Manual

29 August 2024
Mach Power

Mach Power SW-UG24L2F-075 Manual

29 August 2024
Mach Power

Mach Power EB-AT10232OS Manual

29 August 2024
Mach Power

Mach Power HC-EDC2035 Manual

29 August 2024
Mach Power

Mach Power VS-NVRP4C4K-313 Manual

29 August 2024
Mach Power

Mach Power IT-ULA65T8 Manual

29 August 2024
Mach Power

Mach Power IT-ULA90T8 Manual

29 August 2024
Mach Power

Mach Power HC-EDCP235 Manual

29 August 2024
Mach Power

Mach Power NW-PE100M Manual

28 August 2024
Mach Power

Mach Power EB-AT10232O Manual

28 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock

Hozelock 5102 Manual

2 August 2025
ART

ART 310 Manual

2 August 2025
Gorenje

Gorenje KAS53ZDCINVFT Manual

2 August 2025
Gorenje

Gorenje KAS35ZDCINVFT Manual

2 August 2025
Navman

Navman MY450LMT Manual

2 August 2025
Navman

Navman MiVue 745 Manual

1 August 2025
Hitachi

Hitachi WR22SE Manual

1 August 2025
Synology

Synology M2D20 Manual

1 August 2025
Fluke

Fluke FibertLert-125 Manual

1 August 2025
Buffalo

Buffalo GC882 Manual

1 August 2025