VR (Virtual Reality) Headset:
2. Focal Distance Adjust Knob
1. Download and installed the desired VR (Virtual Reality) Video Players;
Games into your cell phone.
2. Turn on and enter to the desired VR (Virtual Reality) Video Players;
Games apps in your cell phone.
3. Install your cell phone to the VR Headset as follows:
A. Detach off the Cell Phone Holder by side it to left as the illuminate
C. Place the cell phone into the Cell Phone Holder then release the
Movable Holder. (Use the supplied rubber pads to protect your phone if
B. Slide the Movable Holder upward as the illuminate follows:
F. Adjust the length of the Adjustable Belt as desire then wear the VR
E. Connect your earphone to the cell phone as the illuminate follows:
D. Replace the Cell Phone Holder into the VR Headset as the illuminate
G. Slide the Focal Distance Adjust Knobs to front or rear to adjust focus ; slide
to left and right to adjust the distance between eyes as desired.
• Slide the Focal Distance Adjust Knobs left and right to adjust the distance
• Slide the Focal Distance Adjust Knobs front and rear to adjust the distance
4. If your cell phone equipped a built in Gyroscope Sensor, and the installed
apps supported it. You can oscillation the VR Headset during
layback/playing to got the specially effects
SPECIFICATION AND ACCESSORIES ARE
SUBJECT TO CHANGE WITHOUT NOTICE
5. If your cell phone becomes warm or hot after long time playing. Slide the
Front Panel to right for ventilate as the illustrated below:
• Keep the lenses clean and protect them from getting scratched. If the lenses
get dirty or steam up. Clean them with the lens cleaning cloth, or use water or
• To clean the cabinet, soak the cloth in a weak detergent solution, wring well
and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such
as thinner and benzene, as they may damage the surface of the cabinet.
• If you use a chemical-saturated cloth to clean the unit, follow that product's
