2
ENGLISH (Original instructions)
SPECIFICATIONS
Model 6904VH 6905H
Standard bolt M10 - M16 M12 - M20
High tensile bolt M10 - M12 M12 - M16
Wood screw 6 mm x 100 mm -
Capacities
Self-drilling screw 6 mm -
Square drive 12.7 mm 12.7 mm
High: 0 - 2,400 2,200
No load speed (min-1) Low: 0 - 2,100 -
High: 0 - 3,000 2,600
Impacts per minute Low: 0 - 2,500 -
High: 196 N.m 294 N.m
Max. fastening torque Low: 147 N.m -
Overall length 265 mm 275 mm
Net weight 1.8 kg 2.3 kg
Safety class /II /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE036-1
Intended use
The tool is intended for fastening bolts and nuts.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model 6904VH
Sound pressure level (L
pA) : 95 dB(A)
Sound power level (L
WA) : 106 dB(A)
Uncertainty (K) : 3 dB(A)
Model 6905H
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 6904VH
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
