Makita 9237CB Manual

Makita Kværn 9237CB

Læs gratis den danske manual til Makita 9237CB (12 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Makita 9237CB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Polisher

9237CB

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model 9237CB

Max. capacities Wool pad 180 mm

Wool bonnet 180 mm

Spindle thread M14 or 5/8" (country specic)

Rated speed (n) / No load speed (n

0 )3,200 min-1

Overall length 431 mm

Net weight 3.3 - 3.5 kg

Safety class /II

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may differ from country to country.

• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to

EPTA-Procedure 01/2014, are shown in the table.

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

DOUBLE INSULATION

Wear safety glasses.

Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of the European Directive,

on Waste Electric and Electronic

Equipment and its implementation in

accordance with national law, electric

equipment that have reached the end of

their life must be collected separately and

returned to an environmentally compatible

recycling facility.

Intended use

The tool is intended for polishing.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (LpA) : 83 dB (A)

Sound power level (L

WA) : 94 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Work mode : polishing

Vibration emission (a

h,P) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

NOTE: The declared vibration emission value is used

for main applications of the power tool. However if the

power tool is used for other applications, the vibration

emission value may be different.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and instruc

tions may result in electric shock, re and/or serious

injury.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kværn
Model:	9237CB
Vekselstrømsindgangsspænding:	230 V
Bredde:	198 mm
Højde:	187 mm
Vægt:	3400 g
Produktfarve:	Black, Blue, Metallic
Indgangseffekt:	1200 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	3200 rpm
Soft greb:	Ja
Kabellængde:	4 m
Længde:	431 mm
Slibeskive, diameter:	180 mm