Makita 9558NBR Manual

Makita Kværn 9558NBR

Læs gratis den danske manual til Makita 9558NBR (12 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 67 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 34 anmeldelser. Har du et spørgsmål om Makita 9558NBR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Angle Grinder

9557NBR

9558NBR

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: 9557NBR 9558NBR

Wheel diameter 115mm (4-1/2″) 125mm (5″)

Max. wheel thickness 6.4mm

Spindle thread M14 or 5/8″ (country specic)

Rated speed (n) 11,000min-1

Overall length 271mm

Net weight 2.0kg 2.1kg

Safety class /II

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Wear safety glasses.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (LpA) : 86 dB(A)

Sound power level (LWA) : 97 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Model 9557NBR

Work mode: surface grinding

Vibration emission (ah, AG) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding

Vibration emission (ah, DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model 9558NBR

Work mode: surface grinding

Vibration emission (ah, AG) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding

Vibration emission (ah, DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

WARNING: The declared vibration emission

value is used for main applications of the power tool.

However if the power tool is used for other applica-

tions, the vibration emission value may be different.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kværn
Model:	9558NBR
Vægt:	1600 g
Udgangseffekt:	840 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	11000 rpm
Kabellængde:	2.5 m
Slibeskive, diameter:	125 mm