Makita DCS552RTJ Manual

Makita Sav DCS552RTJ

Læs gratis den danske manual til Makita DCS552RTJ (12 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Makita DCS552RTJ, eller vil du spørge andre brugere om produktet?

Side 1/12
INSTRUCTION MANUAL
Cordless Metal Cutter
DCS552
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DCS552
Blade diameter 136 mm
Max. Cutting depth 50.5 mm
No load speed 3,600 min-1
Rated voltage D.C. 18 V
Overall length 348 mm
Net weight 2.4 - 2.7 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Symbols
Thefollowingshowthesymbolsusedfortheequip-
ment.Besurethatyouunderstandtheirmeaningbefore
use.
Read instruction manual.
Ni-MH
Li-ion
OnlyforEUcountries
Donotdisposeofelectricequipmentor
batterypacktogetherwithhouseholdwaste
material!
In observance of the European Directives,
on Waste Electric and Electronic
EquipmentandBatteriesandAccumulators
and Waste Batteries and Accumulators
and their implementation in accordance
withnationallaws,electricequipmentand
batteriesandbatterypack(s)thathave
reached the end of their life must be col-
lectedseparatelyandreturnedtoanenvi-
ronmentallycompatiblerecyclingfacility.
Intended use
The tool is intended for cutting in mild steel.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841-2-5:
Soundpressurelevel(L
pA):102dB(A)
Soundpowerlevel(L
WA):113dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
mined according to EN62841-2-5:
Work mode: cutting metal
Vibrationemission(a
h,M):2.5m/s2
Uncertainty(K):1.5m/s
2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared vibration emission value
mayalsobeusedinapreliminaryassessmentof
exposure.
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emissionvaluedependingonthewaysinwhichthe
tool is used.
WARNING:Besuretoidentifysafetymeasures
to protect the operator that are based on an estima-
tionofexposureintheactualconditionsofuse(taking
accountofallpartsoftheoperatingcyclesuchas
the times when the tool is switched off and when it is
runningidleinadditiontothetriggertime).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.


Produkt Specifikationer

Mærke: Makita
Kategori: Sav
Model: DCS552RTJ
Bredde: 196 mm
Dybde: 348 mm
Højde: 203 mm
Vægt: 2700 g
Brugervejledning: Ja
Produktfarve: Black, Mint colour
Batterispænding: 18 V
Motortype: Børstefri
Indbygget lys: Ja
Batteriteknologi: Lithium-Ion (Li-Ion)
Pakketype: Kasse
Strømkilde: Batteri
Tomgang (maks.): 3600 rpm
Numre af batterier medfølger: 1 stk
Lydeffektniveau: 113 dB
Lydtryksniveau: 102 dB
Støvblæser: Ja
Støvudledningsport: Ja
Usikkerhed i lydniveauet: 3 dB
Blad, diameter: 136 mm
Klinge boring: 20 mm
Savblade inkluderet: Ja
Langsom start: Ja
Batteri medfølger: Ja
Skæredybe (90º): 50.5 mm
Velegnet til materialer: Metal
Antal savklinger: 1
Hurtig stop-funktion: Ja
Skruetrækker inkluderet: Ja
Vibrationsniveau (træskæring): 2.5 m/s²
Usikkerhed om vibrationsniveau (træskæring): 1.5 m/s²
Garantiperiode: 3 År

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DCS552RTJ stil et spørgsmål nedenfor, og andre brugere vil svare dig