Makita DDF453RFE Manual

Makita Boremaskine DDF453RFE

Læs gratis den danske manual til Makita DDF453RFE (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Makita DDF453RFE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Driver Drill

DDF343

DDF453

009075

ENGLISH (Original instructions)

SPECIFICATIONS

Model DDF343 DDF453

Steel 10 mm 13 mm

Wood 25 mm 36 mm

Wood screw 5.1 x 63 mm 6 mm x 75 mm

Capacities

Machine screw 6 mm

High (2) 0 - 1,300

No load speed (min-1) Low (1) 0 - 400

Overall length 192 mm 214 mm

Net weight 1.4 kg 1.6 kg

Rated voltage D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-4

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE034-1

Intended use

The tool is intended for drilling and screw driving in wood,

metal and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model DDF343

Sound pressure level (LpA) : 70 dB (A) or less

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A)

Model DDF453

Sound pressure level (L

pA) : 72 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	DDF453RFE
Bredde:	79 mm
Dybde:	214 mm
Højde:	227 mm
Vægt:	1600 g
Produktfarve:	Black, Blue
Batterispænding:	18 V
Batterikapacitet:	3 At
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Soft greb:	Ja
Numre af batterier medfølger:	2 stk
Lydtryksniveau:	72 dB
Omvendt:	Ja
Produktdesign:	Pistolgreb boremaskine
Borepatron, kæbe breddee (maks.):	13 mm
Torsion indstillinger:	16
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	36 mm
Antal gear:	2
Boring:	Ja
Skruearbejde:	Ja
Batteri medfølger:	Ja
Maksimal torsion (bløde applikationer):	27 Nm
Borepatron, kæbe bredde (min.):	1.5 mm
Tomgangshastighed (1. gear):	400 rpm
Tomgangshastighed (2. gear):	1300 rpm
Maksimal torsion (hårde applikationer):	42 Nm