Makita DF333DZ Manual

Makita Boremaskine DF333DZ

Læs gratis den danske manual til Makita DF333DZ (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Makita DF333DZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Cordless Driver Drill

DF333D

DF033D

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DF333D DF033D

Drilling capacities 10 mmSteel

Wood 21 mm

Fastening capacities Wood screw 5.1 mm x 63 mm

Machine screw M6

No load speed High (2) 0 - 1,700 min-1

Low (1) 0 - 450 min-1

Overall length 179 mm 149 mm

Rated voltage D.C. 10.8 V - 12 V max

Net weight 1.1 - 1.2 kg 0.93 - 1.1 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1015 / BL1016 / BL1020B / BL1021B / BL1040B / BL1041B

Charger DC10SA / DC10SB / DC10WC / DC10WD / DC18RE

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingshowthesymbolsusedfortheequipment.

Besurethatyouunderstandtheirmeaningbeforeuse.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Donotdisposeofelectricequipmentorbattery

pack together with household waste material!

In observance of the European Directives,

onWasteElectricandElectronicEquipment

and Batteries and Accumulators and Waste

Batteries and Accumulators and their imple-

mentation in accordance with national laws,

electricequipmentandbatteriesandbattery

pack(s) that have reached the end of their life

mustbecollectedseparatelyandreturnedtoan

environmentallycompatiblerecyclingfacility.

Intended use

The tool is intended for drilling and screw driving in

wood, metal and plastic.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-1:

Model DF333D

Sound pressure level (LpA) : 70 dB(A) or less

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

Model DF033D

Sound pressure level (LpA) : 70 dB(A) or less

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-1:

Model DF333D

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty(K):1.5m/s2

Model DF033D

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty(K):1.5m/s2

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE: The declared vibration emission value

mayalsobeusedinapreliminaryassessmentof

exposure.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	DF333DZ
Bredde:	66 mm
Dybde:	179 mm
Højde:	212 mm
Vægt:	1200 g
Produktfarve:	Turkis
Batterispænding:	12 V
Indbygget lys:	Ja
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Tomgang (min.):	450 rpm
Tomgang (maks.):	1700 rpm
Batterioplader inkluderet:	Ingen
Justerbar hastighed:	Ja
Produktdesign:	Pistolgreb boremaskine
Usikkerhed - k:	1.5 m/s²
Maksimal torsion:	30 Nm
Borepatron, kæbe breddee (maks.):	10 mm
Torsion indstillinger:	20
Bore diameter, stål (maks.):	10 mm
Bore diameter, træ (maks.):	21 mm
Antal gear:	2
Bore diameter, beton (maks.):	- mm
Justerbart drejningsmoment:	Ja
Boring:	Ja
Skruearbejde:	Ja
Batteri medfølger:	Ingen
Maksimal torsion (bløde applikationer):	14 Nm
Borepatron, kæbe bredde (min.):	0.8 mm
Maksimal torsion (hårde applikationer):	30 Nm
Drejningsmoment (min.):	14 Nm