Makita DFR750Z Manual

Makita Skruemaskine DFR750Z

Læs gratis den danske manual til Makita DFR750Z (28 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Makita DFR750Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

INSTRUCTION MANUAL

MANUEL D'INSTRUCTION

MANUAL DE INSTRUCCIONES

IMPORTANT: Read Before Using.

IMPORTANT: Lire avant usage.

IMPORTANTE: Leer antes de usar.

Cordless Auto Feed Screwdriver

Visseuse Automatique sans Fil

Atornillador Autoalimentado

Inalámbrico

DFR540

DFR550

DFR750

008261

ENGLISH (Original instructions)

SPECIFICATIONS

Model DFR540 DFR550 DFR750

Screw strip

4×25 - 55 (5/32" x 1" x 2-3/16") 4×25 - 55 (5/32" x 1" x 2-3/16")

4×45 - 75 (5/32" x 1-3/4" x 2-15/16")

No load speed (RPM) 4,000 /min

Overall length 424 mm (16-3/4") 424 mm (16-3/4") 464 mm (18-1/4")

Net weight 2.0 kg (4.4 lbs)

2.1 kg (4.5 lbs) 2.3 kg (5.1 lbs) 2.1 kg (4.6 lbs) 2.4 kg (5.2 lbs)

Rated voltage D.C. 14.4 V D.C. 18 V D.C. 18 V

Standard battery cartridges BL1430 / BL1440 BL1815 /

BL1815N

BL1830 / BL1840 /

BL1850

BL1815 /

BL1815N

BL1830 / BL1840 /

BL1850

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal Safety

10.

Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

moment of inattention while operating power tools

may result in serious personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your finger on the switch or energising power tools

that have the switch on invites accidents.

13. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

14. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Skruemaskine
Model:	DFR750Z
Bredde:	80 mm
Dybde:	464 mm
Højde:	238 mm
Vægt:	2100 g
Produktfarve:	Black,Blue
Batterispænding:	18 V
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Tomgang (maks.):	4000 rpm
Soft greb:	Ja
Batteri medfølger:	Ingen