Makita DGA455Z Manual

Makita Kværn DGA455Z

Læs gratis den danske manual til Makita DGA455Z (48 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Makita DGA455Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/48

INSTRUCTION MANUAL

MANUEL D'INSTRUCTION

MANUAL DE INSTRUCCIONES

IMPORTANT: Read Before Using.

IMPORTANT: Lire avant usage.

IMPORTANTE: Leer antes de usar.

Cordless Angle Grinder

Meuleuse d’Angle sans Fil

Esmeriladora Angular Inalámbrica

DGA405

DGA455

DGA505

015305

ENGLISH (Original instructions)

SPECIFICATIONS

Model DGA405 DGA455 DGA505

Wheel diameter 100 mm (4") 115 mm (4-1/2") 125 mm (5")

Max. wheel thickness 6 mm (1/4") 6 mm (1/4") 6 mm (1/4")

Spindle thread M10 X 1.25 5/8"

Rated speed (n) / No load speed (n

0) 8,500 /min

With battery cartridge BL1815N, BL1820, BL1820B

348 mm (13-3/4")

Overall length

With battery cartridge BL1830, BL1830B,

BL1840, BL1840B, BL1850, BL1850B, BL1860B

362 mm (14-1/4")

With battery cartridge BL1815N, BL1820, BL1820B

2.2 kg (4.8 lbs) 2.3 kg (5.1 lbs) 2.3 kg (5.1 lbs)

Net weight

With battery cartridge BL1830, BL1830B,

BL1840, BL1840B, BL1850, BL1850B, BL1860B

2.4 kg (5.4 lbs) 2.5 kg (5.6 lbs) 2.6 kg (5.7 lbs)

Rated voltage D.C. 18 V

Standard battery cartridge BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,

BL1840B, BL1850, BL1850B, BL1860B

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

GEA006-2

General Power Tool Safety Warnings

WARNING Read all safety warnings and all

instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord

suitable for outdoor use reduces the risk of electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal safety

10.

Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication.

moment of inattention while operating power tools

may result in serious personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kværn
Model:	DGA455Z
Vægt:	1900 g
Batterispænding:	18 V
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Tomgang (maks.):	8500 rpm
Vibrationsudledning:	5.5 m/s²
Slibeskive, diameter:	115 mm