Makita DHP487Z Manual

Makita Boremaskine DHP487Z

Læs gratis den danske manual til Makita DHP487Z (12 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 75 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 38 anmeldelser. Har du et spørgsmål om Makita DHP487Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Cordless Hammer Driver Drill

DHP487

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DHP487

Drilling capacities 13 mmMasonry

Steel 13 mm

Wood Auger bit: 36 mm

Self-feed bit: 35 mm

Hole saw: 51 mm

Fastening capacities Wood screw 6 mm x 75 mm

Machine screw M6

No load speed High (2) 0 - 1,700 min-1

Low (1) 0 - 500 min-1

Blows per minute High (2) 0 - 25,500 min-1

Low (1) 0 - 7,500 min-1

Overall length 164 mm

Rated voltage D.C. 18 V

Net weight 1.4 - 1.7 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydierfromcountrytocountry.

• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Some of the battery cartridges and chargers listed above may not be available depending on your region of

residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

andchargersmaycauseinjuryand/orre.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for impact drilling in brick, brickwork

and masonry. It is also suitable for screw driving and

drilling without impact in wood, metal, ceramic and

plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-1:

Sound pressure level (L

PA) : 83 dB(A)

Sound power level (L

WA) : 94 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Boremaskine
Model:	DHP487Z
Vægt:	1400 g
Produktfarve:	Black,Blue
Batterispænding:	18 V
Indbygget lys:	Ja
Pakkevægt:	1700 g
Borepatron type:	Nøglefri
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Tomgang (maks.):	1700 rpm
Lydeffektniveau:	94 dB
Lydtryksniveau:	83 dB
Justerbar hastighed:	Ja
Produktdesign:	Pistolgreb boremaskine
Borepatron, kæbe breddee (maks.):	13 mm
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	36 mm
Antal gear:	2
Påvirkningshastighed (lav hastighed):	7500 bpm or slag i minuttet
Effekt hastighed (høj hastighed):	25500 bpm or slag i minuttet
Bore diameter, beton (maks.):	13 mm
Vibrationsniveau (betonboring):	10.5 m/s²
Vibrationsniveau (metalboring):	2.5 m/s²
Justerbart drejningsmoment:	Ja
Boring:	Ja
Skruearbejde:	Ja
Slagboring:	Ja
Borepatron, kæbe bredde (min.):	1.5 mm
Tomgangshastighed (1. gear):	500 rpm
Indikator for frem/tilbage:	Ja