2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DHR164 DHR165
Concrete 16 mm
Steel 13 mm Capacities
Wood 24 mm
No load speed 0 - 1,600 min
-1
Blows per minute 0 - 5,300
Overall length 297 mm
Rated voltage D.C. 14.4 V D.C. 18 V
Battery cartridge BL1415N BL1430,
BL1440
BL1815N,
BL1820
BL1830, BL1840,
BL1850
Net weight 2.2 kg 2.4 kg 2.2 kg 2.5 kg
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-6
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
ENE042-1
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model DHR164
Sound pressure level (L
pA) : 85 dB (A)
Sound power level (L
WA) : 96 dB (A)
Uncertainty (K) : 3 dB (A)
Model DHR165
Sound pressure level (L
pA) : 88 dB (A)
Sound power level (L
WA) : 99 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model DHR164
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 12.5 m/s
2
Uncertainty (K) : 2.0 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 3.5 m/s
2
Uncertainty (K) : 1.5 m/s2
Model DHR165
Work mode : hammer drilling into concrete
Vibration emission (ah,HD) : 12.0 m/s
2
Uncertainty (K) : 1.5 m/s2
Work mode: drilling into metal
Vibration emission (ah,D) : 3.0 m/s
2
Uncertainty (K) : 1.5 m/s2
Cd
Ni-MH
Li-ion
