Makita DHR264ZJ Manual

Makita Skruemaskine DHR264ZJ

Læs gratis den danske manual til Makita DHR264ZJ (36 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Makita DHR264ZJ, eller vil du spørge andre brugere om produktet?

Side 1/36
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.
Cordless Combination Hammer
Marteau Combiné sans Fil
Martillo Rotativo Combinado
Inalámbrico
DHR263
DHR264
014401
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DHR263 DHR264
Concrete 26 mm (1") 26 mm (1")
Steel 13 mm (1/2") 13 mm (1/2") Capacities
Wood 32 mm (1-1/4") 32 mm (1-1/4")
No load speed (RPM) 0 - 1,250 /min 0 - 1,250 /min
Blows per minute 0 - 5,000 0 - 5,000
Overall length 350 mm (13-3/4") 374 mm (14-3/4")
Net weight 4.6 kg (10.1 lbs) 4.7 kg (10.3 lbs)
Rated voltage D.C. 36 V
Standard battery cartridge(s)
Warning: Use only the battery(ies) described. BL1830 / BL1840
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Note: Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.


Produkt Specifikationer

Mærke: Makita
Kategori: Skruemaskine
Model: DHR264ZJ

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DHR264ZJ stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skruemaskine Makita Manualer

Makita

Makita DTW1005 Manual

26 August 2025
Makita

Makita TD004G Manual

26 August 2025
Makita

Makita DDF492 Manual

26 August 2025
Makita

Makita DDF489 Manual

11 August 2025
Makita

Makita TW003G Manual

19 Juli 2025
Makita

Makita TW002G Manual

19 Juli 2025
Makita

Makita BFL301R Manual

9 Juli 2025
Makita

Makita DTW302 Manual

9 Juli 2025
Makita

Makita DFT083F Manual

9 Juli 2025

Skruemaskine Manualer

Nyeste Skruemaskine Manualer

NEO Tools

NEO Tools 14-010 Manual

29 September 2025
Yato

Yato YT-09512 Manual

29 September 2025
Metabo

Metabo SBE 650/13 Manual

29 September 2025
Hazet

Hazet 9213-1000LB Manual

28 September 2025
NEO Tools

NEO Tools 14-502 Manual

28 September 2025
Hazet

Hazet 9012ECO Manual

28 September 2025
Hazet

Hazet 9212-1000LB Manual

28 September 2025
Yato

Yato YT-09702 Manual

28 September 2025
Yato

Yato YT-09525 Manual

27 September 2025
Yato

Yato YT-09505 Manual

27 September 2025