Makita DTM52Z Manual

Makita Multiværktøj DTM52Z

Læs gratis den danske manual til Makita DTM52Z (34 sider) i kategorien Multiværktøj. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Makita DTM52Z, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/34
INSTRUCTION MANUAL
Cordless Multi Tool
DTM52
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DTM52
Oscillation per minute 10,000 - 20,000 min
-1
Oscillation angle, left/right 1.8° (3.6° total)
Overall length with BL1820B 305 mm
with BL1860B 322 mm
Net weight 1.7 - 2.0 kg
Rated voltage D.C. 18 V
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Applicable application tool
Use the application tool which type is adaptable to this
tool as shown in the following table.
OIS
STARLOCK PLUS
STARLOCK
STARLOCK MAX
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for sawing and cutting wood,
plastic, gypsum, non-ferrous metals, and fastening
elements (e.g. nails and staples). It is also intended for
working soft wall tiles, as well as dry sanding and scrap-
ing of small surfaces. It is especially for working close to
edge and ush cutting.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-4:
Work mode: Sanding
Sound pressure level (L
pA) : 69 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
The typical A-weighted noise level determined accord-
ing to EN62841-1:
Work mode: Cutting with plunge cut saw blade
Sound pressure level (L
pA) : 72 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).

Produkt Specifikationer

Mærke: Makita
Kategori: Multiværktøj
Model: DTM52Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DTM52Z stil et spørgsmål nedenfor, og andre brugere vil svare dig


Multiværktøj Makita Manualer

Makita

Makita DTM52ZJ Manual

8 Juli 2025
Makita

Makita DTM52Z Manual

8 Oktober 2024
Makita

Makita DUX60PT2 Manual

2 September 2024
Makita

Makita DTM50RT1J3 Manual

31 August 2024
Makita

Makita TD110D Manual

7 August 2024
Makita

Makita TM3000CX1J Manual

6 August 2024
Makita

Makita BTM40ZJX3 Manual

6 August 2024
Makita

Makita BTM50RFEX3 Manual

4 August 2024
Makita

Makita 195652-1 Manual

1 August 2024
Makita

Makita TM30DZJX4 Manual

1 August 2024

Multiværktøj Manualer

Nyeste Multiværktøj Manualer

Graphite

Graphite 59G025 Manual

8 Juli 2025
Graphite

Graphite 59G023 Manual

8 Juli 2025
NEO Tools

NEO Tools 04-604 Manual

8 Juli 2025
Solo

Solo CSA 4220 Manual

8 Juli 2025
Dremel

Dremel 3200 Manual

6 Juli 2025
Ribimex

Ribimex PRBAT20/PMVSB Manual

6 Juli 2025
Flex

Flex MT 18.0-EC Set Manual

6 Juli 2025
Milwaukee

Milwaukee M12 Fuel FMT Manual

5 Juli 2025
Flex

Flex MT 18.0-EC Manual

4 Juli 2025
Trotec

Trotec PMTS 10-20V NB Manual

23 Juni 2025