Makita GA4530RKD Manual

Makita Kværn GA4530RKD

Læs gratis den danske manual til Makita GA4530RKD (29 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 55 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 28 anmeldelser. Har du et spørgsmål om Makita GA4530RKD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/29

INSTRUCTION MANUAL

Angle Grinder

GA4030R

GA4530R

GA5030R

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: GA4030R GA4530R GA5030R

Wheel diameter 100mm (4″) 115mm (4-1/2″) 125mm (5″)

Max. wheel thickness 6.4mm

Spindle thread M10 M14 or 5/8″ (country specic)

Rated speed (n) 11,000min-1

Overall length 266mm

Net weight 1.7kg 1.8kg

Safety class /II

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Wear safety glasses.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Sound pressure level (LpA) : 85 dB(A)

Sound power level (LWA) : 96 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Model GA4030R

Work mode: surface grinding

Vibration emission (a

h, AG) : 7.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding

Vibration emission (a

h, DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model GA4530R

Work mode: surface grinding

Vibration emission (a

h, AG) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding

Vibration emission (a

h, DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model GA5030R

Work mode: surface grinding

Vibration emission (a

h, AG) : 8.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding

Vibration emission (a

h, DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kværn
Model:	GA4530RKD

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita GA4530RKD stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kværn Makita Manualer

18 September 2025

11 September 2025

11 September 2025

12 August 2025

9 Juli 2025

Makita GA7030SF Manual

9 Juli 2025

Makita 9079SF Manual

9 Juli 2025

Makita DGA521 Manual

8 Juli 2025

Makita GD0601 Manual

8 Juli 2025

Makita GA9030SF Manual

8 Juli 2025

Kværn Manualer

Nyeste Kværn Manualer

Yato YT-09675 Manual

27 September 2025

Ergotools Pattfield E-WS 125/950 Manual

23 September 2025

Ergotools Pattfield E-WS 600 Manual

23 September 2025

Draper 29620 Manual

23 September 2025

Ergotools Pattfield E-WS 230/2350 Manual

23 September 2025

20 September 2025

20 September 2025

20 September 2025

20 September 2025

20 September 2025