Makita GA5020Y Manual

Makita Kværn GA5020Y

Læs gratis den danske manual til Makita GA5020Y (12 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 89 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 45 anmeldelser. Har du et spørgsmål om Makita GA5020Y, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Angle Grinder

GA5020

GA5020C

GA5021

GA5021C

GA6020

GA6020C

GA6021

GA6021C

008074

ENGLISH

SPECIFICATIONS

Model GA5020 GA5021 GA5020C /

GA5021C GA6020 GA6021 GA6020C /

GA6021C

Depressed center wheel diameter

125 mm 125 mm 125 mm 150 mm 150 mm 150 mm

Spindle thread M14 M14 M14 M14 M14 M14

No load speed (n

o) / Rated

speed (n) 11,000 min-1 11,000 min-1 10,000 min-1 10,000 min-1 10,000 min-1 9,000 min-1

Overall length 356 mm 384 mm 390 mm 356 mm 384 mm 390 mm

Net weight 2.7 kg 2.7 kg 2.9 kg 3.0 kg 2.8 kg 3.0 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

GEA005-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kværn
Model:	GA5020Y

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita GA5020Y stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kværn Makita Manualer

29 Marts 2025

29 Marts 2025

14 November 2024

5 September 2024

Makita GA013GD202 Manual

26 April 2024

Makita GA5040RZ1 Manual

17 April 2024

Makita DBO481 Manual

17 April 2024

Makita GA7062R Manual

11 April 2024

Makita GA4530RKD Manual

8 April 2024

Makita GA9061R Manual

4 Februar 2024

Kværn Manualer

Nyeste Kværn Manualer

Hitachi GP2S2 Manual

17 Juni 2025

Metabo CC14SFS Manual

17 Juni 2025

Metabo VB16Y Manual

17 Juni 2025

Hilti SL 5-22 Manual

15 Juni 2025

Victoria Arduino Mythos MyOne Clima Pro Manual

12 Juni 2025

Tryton TS152501 Manual

9 Juni 2025

Sogo SS-5815 Manual

9 Juni 2025

Vulcan VS121301 Manual

9 Juni 2025

Sogo SS-5265 Manual

9 Juni 2025

Smart365 SM-04-04200 Manual

9 Juni 2025