Makita GA5050 Manual

Makita Kværn GA5050

Læs gratis den danske manual til Makita GA5050 (16 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Makita GA5050, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

INSTRUCTION MANUAL

Angle Grinder

GA4050

GA4050R

GA4550

GA4550R

GA5050

GA5050R

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: GA4050

GA4050R

GA4550

GA4550R

GA5050

GA5050R

Wheel diameter 100 mm (4″) 115 mm (4-1/2″) 125 mm (5″)

Max. wheel thickness 6.4 mm (1/4″) 7.2 mm (9/32″)

Spindle thread M10 M14 or 5/8″

Rated speed (n) 11,000 min-1

Overall length 325 mm

Net weight 2.3 - 2.6 kg

2.4 - 2.8 kg

2.5 - 2.8 kg

Safety class /II

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may dier from country to country.

• The weight may dier depending on the attachment(s). The lightest and heaviest combination, according to

EPTA-Procedure 01/2014, are shown in the table.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Wear safety glasses.

DOUBLE INSULATION

Only for EU countries

Do not dispose of electric equipment

together with household waste material! In

observance of the European Directive, on

Waste Electric and Electronic Equipment

and its implementation in accordance with

national law, electric equipment that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of the same

voltage as indicated on the nameplate, and can only be operated

on single-phase AC supply. They are double-insulated and can,

therefore, also be used from sockets without earth wire.

Noise

The typical A-weighted noise level determined according to EN60745-2-3:

Model Sound pressure

level (LpA) : (dB(A))

Sound power level

(LWA) : (dB(A))

Uncertainty (K) :

(dB(A))

GA4050 91 102 3

GA4050R 91 102 3

GA4550 91 102 3

GA4550R 91 102 3

GA5050 91 102 3

GA5050R 91 102 3

NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and

may be used for comparing one tool with another.

NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual use of the power tool can dier from the declared val-

ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.

WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation

of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the

times when the tool is switched o and when it is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kværn
Model:	GA5050
Bredde:	325 mm
Dybde:	117 mm
Højde:	140 mm
Vægt:	2500 g
Produktfarve:	Black, Blue
Indgangseffekt:	1300 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	11000 rpm
Kabellængde:	2.5 m
Lydeffektniveau:	102 dB
Lydtryksniveau:	91 dB
Justerbar hastighed:	Ingen
Usikkerhed i lydniveauet:	3 dB
Vibrationsniveau (slibning):	2.5 m/s²
Usikkerheds om vibrationsniveau (slibning):	1.5 m/s²
Slibeskive, diameter:	125 mm
Antal håndtagspositioner:	1
Funktion til låsning:	Ingen
Bore, størrelse:	22.23 mm