Makita GD0602 Manual

Makita Kværn GD0602

Læs gratis den danske manual til Makita GD0602 (8 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Makita GD0602, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Die Grinder

GD0602

009306

ENGLISH (Original instructions)

SPECIFICATIONS

Model GD0602

Max. collet capacity 8 mm

Max. wheel point diameter 38 mm

Rated speed (n)/No load speed (n

) 25000 min-1

Overall length 264 mm

Net weight 1.4 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE050-1

Intended use

The tool is intended for grinding ferrous materials or

deburring castings.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

ENG104-2

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 75 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

Wear ear protection.

ENG206-3

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : surface grinding

Vibration emission (ah,SG) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-13

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Die Grinder

Model No./ Type: GD0602

are of series production and

Conforms to the following European Directives:

98/37/EC until 28th December 2009 and then with

2006/42/EC from 29th December 2009

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kværn
Model:	GD0602
Bredde:	82 mm
Dybde:	264 mm
Højde:	82 mm
Vægt:	1400 g
Produktfarve:	Black, Blue
Støjniveau:	73 dB
Indgangseffekt:	400 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	26000 rpm
Vibrationsniveau (slibning):	2.5 m/s²
Kravediameter:	6 mm
Maksimal diameter for slibe-værktøj:	38 mm