Makita GD0801C Manual

Makita Kværn GD0801C

Læs gratis den danske manual til Makita GD0801C (12 sider) i kategorien Kværn. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Makita GD0801C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Die Grinder

GD0801C

GD0811C

015003

ENGLISH (Original instructions)

SPECIFICATIONS

Model GD0801C GD0811C

Collet size Max. 8 mm Max. 8 mm

Max. wheel diameter 25 mm 50 mm

Max. wheel point diameter Max. mandrel (shank) length 46 mm 46 mm

Rated speed (n) / No load speed (n0

) 29,000 min-1 7,000 min-1

Overall length 390 mm 390 mm

Net weight 2.0 kg 2.0 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-8

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE050-1

Intended use

The tool is intended for grinding ferrous materials or

deburring castings.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Model GD0801C

Sound pressure level (L

pA) : 80 dB (A)

Sound power level (L

WA) : 91 dB (A)

Uncertainty (K) : 3 dB (A)

Model GD0811C

Sound pressure level (L

pA) : 78 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model GD0801C

Work mode : surface grinding

Vibration emission (ah) : 3.5 m/s2

Uncertainty (K) : 1.5 m/s2

Model GD0811C

Work mode : surface grinding

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

•

The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kværn
Model:	GD0801C
Bredde:	75 mm
Dybde:	390 mm
Højde:	88 mm
Vægt:	2000 g
Produktfarve:	Black,Blue,Silver
Støjniveau:	91 dB
Indgangseffekt:	750 W
Strømkilde:	Vekselstrøm
Vibrationsniveau (slibning):	3.5 m/s²
Maksimal diameter for spændetang:	43 mm